Windows 10: Usb Ports Randomly tuns off when RGb Software is running

Hello, I installed a new graphics card in my PC and re-downloaded Windows. I tried to download "Signal RGB" RGB and the software constantly made it that my USB devices turned off and on and then the software crashed. The same thing happened to me with the L-connect app from lian li. Only after uninstalling/closing the app. The USB devices return to normalHardware:-Ryzen 5 5600G-RX 6800xt-4x8gb 3200mhz-8x120 Lian li inf-corsair aio-1000w power supplyI've already tried a bios update and turned off the power saving settings, but everything works with the corsair app

:)

 

USB Port Oddities


Ok, let's see it with pictures step-by-step. First right-click on the USB device and select Update driver software:





Then select Browse my computer for driver software (LAST option) :





The select Let me pick from a list of device drivers on my computer (LAST option) :





Then select the standard driver from the list and click next:





Click next/OK as required to complete installation. Repeat the steps for all Intel USB devices. Finally click on each USB root device and press DEL to delete it, reply YES when asked. After deleting all USB root devices restart the computer.

I hope this is detailed enough...

 

USB Ports not working

Hi Marvin,

We appreciate your interest in Windows 10.

As you are facing issues with accessing the USB ports on your device, do not worry we will help you with this issue.

Do let us know the make and model of the device?

This issue might have occurred due to corrupted drivers on your device. Try the below troubleshooting steps and check if it helps.

Step 1: I suggest you to check if there are any drivers with exclamatory mark in Device Manager.

• Press Windows + X keys from the keyboard, click on
  Device Manager.
• Check for the drivers with exclamatory mark in yellow triangle.
• If so, right click on the driver, click on Properties
  and check the device status.
• Also, try to update the drivers by click on Update driver software
  under Drivers tab in Properties window.

Step 2: I suggest you to run Hardware and Devices troubleshooter.

Hardware and Devices troubleshooter
checks for common problems and makes sure that any new device or hardware connected to your PC is installed correctly.

• Press Windows key from the keyboard, type
  Troubleshooting and select it.
• Click on view all option on the upper left corner of
  Troubleshooting window.
• Select the Hardware and Device
  options from the list.
• Click Next to run the
  Hardware and Device Troubleshooter.

Hope it helps. Reply to the post with an updated status of accessing the USB ports for further assistance.

Thank you.

 

USB ports

Hi Frank,

Inserting and removing a USB device repeatedly may cause the USB port to stop responding. When the port is in this state, it no longer recognizes any USB device, and the USB device will not work.

Here are few things that you can do to resolve the issue:

Use Device Manager to scan for hardware changes. After your computer scans for hardware changes, it might recognize the USB device that is connected to the USB port so that you can use the device.

To scan for hardware changes, follow these steps:

• Click Start, and then click Run.
  
  Note If you are running Windows Vista, click Start, and then use the Start Search box.
• Type devmgmt.msc, and then click OK. Device Manager opens.
• In Device Manager, click your computer so that it is highlighted.
• Click Action, and then click Scan for hardware changes.
• Check the USB device to see whether it is working.

Turn off Allow the computer to turn off this device to save power.

• In the Device Manager dialog box, expand Universal Serial Bus controllers, right-click USB Root Hub, and then click Properties.
• In the USB Root Hub Properties dialog box, click the Power Management tab. Uncheck the
  Allow the computer to turn off this device to save power
  box.
  

Let us know how it goes after performing the suggested troubleshooting steps.