Windows 10: usb stick abnormalities

I have 2 usb connected to pc.I checked and see both chdsks are ok.One 7gig FAT usb Active ,primary partitionSandisk 8 gig FAT usb primary partitionso my question is -why is the sandisk 8 gig -not Active ??? I tried changing the usbs in their socket- same reading just different drive letter.if both File systems are ok - then why does the "sandisk 8 gig - Not display Active ????

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

USB stick previously used as a boot stick for Killdisk not recognized

Try method 2 under Windows 7 8 10 here:
Free to Remove Readonly Attribute in Windows

Method 2: Clear readonly status with Diskpart

In Windows 10, 8, 7 OS, you are also able to run Diskpart in Command Prompt to clear read-only attribute on any partition on your computer. You can follow the tutorial below:

Step 1. Open Command Line and type Diskpart
Step 2. Type list disk
Step 3. Type select disk (disk number)
Step 4. Type attributes disk clear readonly





Then try Clean

 

Cannot get Win10 to recognize a 128g usb memory stick.

Hello Brad,

To assist you with your concern, please answer the following:

• Which device are you using?
• Are you receiving any error message when you're trying to connect your USB Memory Stick?
• Have you tried any troubleshooting steps?

Looking forward to your response.