Windows 10: usb universal serial bus and dispositives. PLEASE HELP ME

so, after i have done a reboot of my pc, things with the usb started to turn bad. my graphic table didn't work, my ps3 controller didn't work, my webcam didn't work, ANYTHING. please help me i'm desperate

:)

 

Error code 43 Universal Serial Bus port issue Windows 10.

Hi Hector,

Thank you for posting your query in Microsoft Community and for your interest in Windows 10.

I can understand, how frustrating it can be, when things don’t work as expected.

We apologize for the inconvenience caused to you.

I'd be glad to help you.

A Code 43 error is created, when the Device Manager stops a hardware device, because the hardware reported to Windows that it's having some kind of unspecified problem.

Please follow these methods, mentioned below, to resolve the issue:

Method 1:


You may also update the Universal Serial Bus controllers driver from Device Manager manually and check, if this helps.

•Press (Windows key + X) and click on “Device Manager”.

•Expand “Universal Serial Bus controllers ”.

•Right click on the Universal Serial Bus controllers drivers and select “Update Driver Software”. Once this is done, restart the computer and check, if it works.

If the issue still persists, follow the Method 2.

Method 2:


Uninstall and reinstall the Universal Serial Bus controllers driver and check, if it works. Refer to the following steps to uninstall the Universal Serial Bus controllers driver from the Device Manager.

a. Click on Windows key + X key and then, select Device Manager.

b. Locate and expand “Universal Serial Bus controllers” in the Device Manager Window.

c. Right-click on the “Universal Serial Bus controllers” and click on “uninstall".

d. Restart the computer and check, if it works.

If the issue still persists, follow the Method 3.

Method 3:

Install the latest Universal Serial Bus controllers driver in Compatibility mode:

I suggest you to download the latest Universal Serial Bus controllers driver from manufacture's website and install it in compatibility mode.

1. Right click on the setup file of the driver and select
Properties.

2. Select Compatibility Tab.

3. Place a check mark next to Run this program in
Compatibility Mode and select the operating system accordingly from the drop down list.

4. Let the driver to install and then, check the functionality.

If the issue still persists, follow the Method 4.

Method 4:

Install the latest Chipset Driver from the manufacturer’s website.

Go to the manufacturer’s website, download and install the latest chipset drivers.

You can also refer to the following Microsoft article for more information.

Install USB 3.0 and other USB devices.

http://windows.microsoft.com/en-US/windows-8/install-usb-3-usb-devices

Note: applies to Windows 10.

Hope this information helps you. Kindly post back with the updated issue for further assistance.



Thank you.

 

Help with USB VID_0000&PID_0002\6&32FA202A&0&8

Hi Nikolaos,

We suggest that you apply the troubleshooting procedures below:

Method 1: Run Hardware Troubleshooter
to diagnose issue with hardware if there are any on your computer. Follow the steps:

• Click Start or press Windows logo and go to
  Settings
• Search for troubleshooting and select Troubleshooting
• Go to Hardware and Sounds
• Select Hardware and Devices and click on next, then follow the on-screen instructions.

Method 2: Disable and re-enable all the Universal Serial Bus controllers (USB) controllers.The USB controllers represent the USB ports in Device Manager.

To disable and re-enable the USB controllers, follow these steps:

• Open Device Manager
• Expand Universal Serial Bus controllers.
• Note: You might have to scroll down the list to find this item.
• Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.
• Repeat the above step for each USB controller that is listed under
  Universal Serial Bus controllers.
• Restart the computer. After the computer starts, Windows will automatically scan for hardware changes
• Reinstall all the USB controllers that you uninstalled

Let us know how it goes.

 

USB composite device "driver error"

Can you send us a screenshot of the error message? We suggest uninstalling and re-installing USB drivers and check if the issue persists. To do that, please follow these steps:

• Right-click on the Start button and select Device Manager.
  
• Expand Universal Serial Bus controllers.
• Right-click on the first USB controller under Universal Serial Bus controllers, and then click on
  Uninstall to remove it.
• Repeat these steps for the entire USB controller under Universal Serial Bus controllers.
• Restart the computer. Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.

Regards.