Windows 10: Use Windows 10 on new SSD while accessing files on "old" drive without cloning

Hi,

I have 2 drives in my system: 1 main drive :C with Windows installed, and 1 storage drive. If I now would like to switch my main boot drive to a newer, faster Nvme drive, do I have to clone my old main boot drive or can I just install Windows on the new Nvme drive and access all the data on my old main and storage drive without any complications?

Thanks in advance!

:)

 

Unable to Boot to Windows 10 after Cloning old SSD to new SSD

When you say 'recovered the image to the new SSD'. Did you clone from the HDD to new SSD, and why the round about method ?

I've never cloned to an external drive, with the exception of when the machine has an external hot swap SATA port, but I

have cloned from SSD to HDD and back again using a SATA connection without any issues.

The boot sector should get written to the new drive by the cloning software (I use AOEMI ). The software also sorts out

alignment differences between HDD and SSD.

If there is a problem booting with the new drive, if you swap the SATA ports so the new drive is connected to the port the

old was connected to and vice-versa, the boot sector should get written to the new drive when you reboot.

 

Unable to Boot to Windows 10 after Cloning old SSD to new SSD

Hi,

I'm not using the SATA ports. I'm using M.2 with the SSD, and the external SSD is connected to my PC using USB. My MB only has only one M.2 socket, so I can only plug in one SSD at a time. (I bought a wrong adapter that doesn't work with NVMe) So I cloned
my old SSD to an external SSD (Samsung M3 Portable SSD), and then swapped the old one, cloned the external SSD to my new SSD.

I tried AOMEI too, but the free version does not come with disk clone functions. I would probably try Macrium Reflect as suggested above. Thank you!

 

Moving to SSD. Clone or not to clone?

Part of how I keep my SSD fast is to clone it to a platter drive, then clone back. You just want to make sure that you are only cloning teh used space, and not the empty space.


So, again, I isntall Windows to the ssd. Clone to platter drive, then clone back.

I am not sure why, but if I do not do the clone step, the drive's speed, and windows booting, decreases substantially within a week or so.

I am using a Corsair F60 SSD and a Western Digital 500AAKS as drives, and using the free version of Acronis that WD provides, if any of that matters. I am not sure, at this point.