Windows 10: Using Multiple IP Addresses in a Domain Network

I added a second network adapter and an IP address to the new adapter in Windows 10 Build 2004. I now have the primary Routable on the first adapter and alternate IP addresses peer-to-peer on a second network adapter. The client sometimes think that it's not on a Domain network even after it's joined.


So I used powershell to tell the alternate IP address that it is not the primary. An example of what I used:


Set-NetIPAddress -IPAddress 192.168.50.2 -SkipAsSource $true


or


Set-NetIPAddress -IPAddress 192.168.50.2 -SkipAsSource 1


When I ping 192.168.50.2, the result is returned:


Pinging 192.168.50.2 with 32 bytes of data:

PING: transmit failed. General failure.

PING: transmit failed. General failure.

PING: transmit failed. General failure.

PING: transmit failed. General failure.


The network adapter is not disabled in Windows, but according to the documentation about using the -SkipAsSource 1 or $true

Indicates whether an address is a primary IP address. This parameter identifies the primary IP address for outgoing traffic in a multiple IP address scenario. If this parameter is set to True, the address is not used for outgoing traffic and is not registered in DNS.

https://docs.microsoft.com/en-us/powershell/module/nettcpip/set-netipaddress?view=win10-ps


My issue is that....this is not a solution to using Multiple IP Addresses in a Domain environment, but this switch disables the network adapter's communication. It should have the ability to use outgoing traffic, but not register in DNS. Is there a better solution to using multiple IP's and identifying them? Is there a way to enable the Alternate IP Address tab in a Domain environment or something similar?

:)

 

Finding IP address

Hello,

Thank you for writing to Microsoft Community Forums.

I suggest you to follow the steps mentioned below to find printer’s IP address:

1. Type Devices and Printers in the Windows search bar.
   
2. Select on the printer and click on
   Manage.
   
3. Click on the Ports tab.
   You will be able to find printer’s IP address under the ‘Ports’ tab.
   

Few printers also have a “Test print” option on the printer. When you print a test page from network printer, the page shows the IP address along with other details.

Note: If it is set on DHCP mode the IP address will constantly change.
The IP address is assigned automatically by your router using a protocol called DHCP.

Hope it helps.

Sandeep Kumar M

Microsoft Community – Moderator

 

IP Address

Hi Will,

You might need your computer's IP address if you want to set up an Internet connection, allow other people to connect to your PC, or need to troubleshoot network problems. Kindly follow these steps to find the IP address of your computer:

• Select the Start button , start typing View network connections, and then select it in the list.
• Select an active network connection, and then, in the toolbar, select
  View status of this connection. (You might need to select the chevron icon to find this command.)
• Select Details. (Your PC's IP address appears in the
  Value column, next to IPv4 Address).

Let us know whenever you need further assistance.

 

IP ADDRESS

This problem usually sorts itself out automatically, but see the following for some suggestions:

https://www.online-tech-tips.com/computer-tips/ip-address-already-in-use/

If you keep getting these notifications, chances are that some device on your network is configured to use a static IP address that is within the range of addresses allocated by your router's DHCP server.

If you need some help in sorting out a situation like this, please provide the following information:

• the make and specific model of your router
• the make and specific model of every device connected to your network, including printers, TV set top boxes, Internet of Things (IoT) devices, etc.

If you have many devices connected to your network, download and run Advanced IP scanner (Advanced IP Scanner - Download Free Network Scanner.). This will list all of your currently-connected
network devices and show their IP addresses.