Windows 10: using S M B protocol to connect to my windows 10

--> There is a problem while connecting to android while using mi file explorer via LAN method.

--> i have submitted all type of username and password combinations that is related to windows login.

--> but it always shows a authentication error

help me ?

:)

 

AC WiFi connecting as N protocol WINDOWS 10 64 BIT

AC Wireless standard is part of the 802.11 family of a 5 Ghz band. Based on your post your connection type is set to 802.11n and the transmission rate is ranging to 585 MBit/s. We suggested that you contact ISP for them to see on their side if there is something
that you have to check in the web UI of your router. We’ll do our best to help you try to change the N protocol to your desired set-up. Try these steps to see if your connection type is set to 802.11ac:

• Press Windows key + X, then select Device Manager.
• Click the dropdown list for your Network Adapters, then right-click on the driver for your USB stick.
• Select Properties, then Advanced Tab.
• Under Advanced Tab, check the following:
  • 40MHz Intolerant is enabled.
  • Wireless Mode value is 802.11ac
  • 800.11n is disable
• Try running netsh wlan show interfaces again, to see if there are changes.

Keep us in the loop with the results.

 

Windows 10 - There is no internet connection: One or more protocols are missing on this computer

Hi Joseph,

To assist you better, I would like to ask some questions.

Did you make any changes prior to this issue?

What is the make and model of your computer?

I suggest you to follow the methods provided below:

Method 1: Run the Network troubleshooter.

• Type “troubleshooting” in the search box and press Enter.
• Click on “View all” on the top left corner.
• Click on “Network Adapter” and follow the prompts for troubleshooting.

Method 2: uninstall and reinstall Link-Layer Topology Discovery Mapper I/O Driver and
Link-Layer Topology Discovery Responder protocols check if it works . To open this follow the steps below.

• Right click on the Start Menu, select Control Panel.
• In the search bar located on the right top corner of the screen type
  Adapter.
• Under Network and Sharing Center click on View Connections.
• Right click on the Ethernet/wireless connection that you are currently connected to.
• Click on Properties locate Link-Layer Topology Discovery Mapper I/O Driver
  and Link-Layer Topology Discovery Responder.
• Select each of the protocols individually and click on uninstall. Once uninstalled click on Install, select Protocol from the list, and click on the Add button.
• Now click on Link-Layer Topology Discovery Mapper I/O Driver and
  Link-Layer Topology Discovery Responder respectively and click on
  OK.
• Reboot the system and check.

Hope this helps. Keep us posted on the status for further assistance.

 

Error : one or more network protocols are missing on Windows 10

Hi Kerry,

Welcome to Microsoft Community.

Sorry to know that you are facing Internet connection issues on Windows 10. I will certainly help you.

You might experience network or Internet connection issues in Windows for a number of reasons. Some common issues that can cause these problems are:

• Corrupted or incompatible drivers.
• Network connection settings.
• Hardware or software problems.
• Your router and the network adapter in your PC might not work together.

I suggest you to follow the steps recommended by Nachappa C K
on December 5, 2015 on similar issue from below link and check if it resolves the issue.

One or more network protocols are missing since update KB3120677.

Hope the information helps. Please let us know if the issue persist and we will be happy to assist you further.