Windows 10: using up ssd drive

I seem to be using up space on my ssd drive, I have 301gb used up via my user profile mainly photos yet i have all of my lightroom pics on a separate 2tb hard drive have i got them twice?

:)

 

Cloning to SSD then swapping drive letters


@SamHobbs
What you want done is very simple and can be done in short period of time. Here's my suggestion:
There's 2 modes that Windows can be installed: UEFI and the old legacy MBR. Open Disk Management, look at the disk where your C drive is, if there's a

1. EFI System Partition, your Windows was installed using UEFI.
2. System Reserved partition, your Windows was installed using MBR

Next, Connect your SSD to an available Sata port (no need to format or do anything). Download: Macrium Reflect Free . Install and run. Follow the steps below:

1. From Macrium, click on image this disk under your C drive and save it to either an Internal or External Drive. This will create a single backup image of the whole disk containing your C drive.
2. Again, from Macrium, click on Restore tab and select the image created from step 1, Select your SSD as the destination drive, click Next->Finish
3. Exit Macrium. If your Windows was installed using MBR, Open disk management and make sure the SSD is marked "Active" else go to next step.
4. Shutdown your PC. Disconnect the HD containing Windows C drive then connect your SSD to it.
5. Reboot. Your PC should boot and the Windows should have C as the drive letter.

NOTE: The procedure above is to backup your Windows to an image file then copy it back to the SSD. This ensures proper cluster size aligment for the SSD. In addition, Macrium also perform Trimming for the SSD. This is more preferable than cloning.

 

Upgrading HP SSD drive on HP 750-524

I purchased an HP Envy tower with a 128Gb SSD which is where Windows is installed, I have purchased a new 1TB SSD drive that I would like to replace the 128 GB drive with. My machine did not come with the Windows 10 Media, what steps do I need to take before
I install the new drive and install windows.

• Where do I get the Windows 10 install
• What steps are needed to create an Install disk
• Do I have to deactivate my old install before removing the old drive.

Please let me know if there are any other considerations.

Best Regards,

Wes

 

Hard drive/ OS issue

a guy suggested :

• shutdown
• unhooked HDD
• restarted
• yay !!
• reconnected HDD
• restarted
• yay !!

also , try method 3
Drive Where Windows is Installed is Locked: How to Unlock It