Windows 10: Using Windows 11 Installation Assistant to upgrade from W10 instead of USB stick W11...

work environment, domain joined devices. Radius server for WiFi. EAP-TLS. Tried manually setting server and end user workstations to TLS 1.2 as the server was running 1.3 no luck. I usually have to hard wire computer in to Internal LAN, then manually add the 802.1x cert to MMC, and computer connects to Internal WiFi after no problem. Now I started upgrading computer to W11 and noticed those computers are not able to connect to Internal WiFi with the radius certificate, only guest wifi with no cert. I am able to add the certificate in MMC but when I go to connect to wifi, the cert does not show

:)

 

create an installation USB Stick with Windows 11 Pro for Workstations

1. How can I create an installation USB Stick with Windows 11 Pro for Workstations...?
   
2. Using Rufus How to do the same, but this time bypassing the W11 restrictions?
   
3. Windows 11 Pro for Workstations released date is...?
   

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

Upgrading to win 11 via MS Installation Assistant.

Thanks for replying. Any reason why you don't like to use installation assistant ?

Earlier I was getting an option to upgrade to W11, but when I reinstalled W10 on my SSD, that option was gone - instead it asked to wait while it checks for compatibility etc. So I did it manually using PC health check app (to check compatibility) and Installation assistant