Windows 10: various BSOD after ~5min in any game

I build a PC last weekend, and i keep getting bsod... Its not always the same but quite often MEMORY_MANAGEMENT.

I checked the cables, exchanged the RAM, repositioned the RAM, removed harddrives... i have no idea what to do. It only happens after a few minutes into a game of XCOM, CSGO, Dishonerd, so i assume it has something to do with the graphics card... I added the Minidumps in the post.


Attachment 42527

My Sytem:
CPU: i5 6600k @3,50 GHz
GPU: Nvidea GTX 970 4 GB
PSU: Be quit! 630W
Storage: Samsung 250 GB SSD
Toshiba 3GB HDD
RAM: Kingston 2x8GB
Motherboard: ASRock Z170M Pro4S

edit: updated Dumpfiles

:)

 

Download the free utility GPU-Z and monitor the graphics card behavior until it fails. See if there's something changing, particularly the temperatures.

 

Hi AndiElse96,

Welcome to the 10forums.

I will check the dump files later in the afternoon as my connection is now not properly, but for now please follow instructions below.



Warning Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you have installed any driver with SlimDrivers, please remove them as it may cause trouble.

Please remove ASRock software, this software is known for causing BSOD's.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

• Uninstall Daemon Tools
• Download the SPTD standalone installer and follow these steps:
  • Double click the executable to open it
  • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window.

 

the temperature stays normal, even with fans set to maximum i still get crashes.

 

Please remove ASRock software, this software is known for causing BSOD's.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

• Uninstall Daemon Tools
• Download the SPTD standalone installer and follow these steps:
  • Double click the executable to open it
  • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window. Did that, restartet, tested and i got another SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION

 

I have only suggested to remove some software to make your system more stable.
As I cannot yet read the dump files, I cannot yet give specific instructions for possible solutions *Sad

 

Should i just format my c: andd reinstall windows 10? i should just pre download the correct drivers probably

 

Don't have patience?

 

if it is a hardware error i sould get it done quickly, before refunds get tricky

 

You can't run a test on hardware without warranty problems?

 

cpu and gpu stay cool, memtests throws no errors, power suplly is okay... so did test. Gonna wait til you had a look at the dumps probably though

 

If you have done the built-in memory test, that is not a proper test feature.
CPU and GPU doesn't have to get a high temperature to be faulty.

 

I updated the Dumpfiles, now 3 or 4 more

 

Please read the forum rules
2) No useless posts, e.g., thread bumping, useless one liners, junk posting to increase post count, and identical multi-postings in different forums.

If you haven't received any help after 24 hours, please post in this thread a link to your thread.

Please uninstall everything of Nvidia using Display Driver Uninstaller and install new drivers from Nvidia.
The DirectX Graphics Kernel driver has been marked as the cause, meaning the graphics drivers are causing problems.
Code: Probably caused by : dxgmms2.sys[/quote] Why have you enabled driver verifier?
Please disable driver verifier

• Open an admin command prompt
• Enter "verifier/reset" (without quotes)

The driver AsrAppCharger.sys, is from 2011 and from ASRock App Charger.
Please remove it.
Located at C:\Windows\System32\drivers\

Please check your software for updates.
This driver mfmonitor_x64 has been flagged, but I am not sure from what it is.
Update or remove the software.
Code: 3: kd> lmvm mfmonitor_x64 start end module name fffff801`cfe00000 fffff801`cfe0a000 mfmonitor_x64 T (no symbols) Loaded symbol image file: mfmonitor_x64.sys Image path: \SystemRoot\system32\DRIVERS\mfmonitor_x64.sys Image name: mfmonitor_x64.sys Timestamp: Thu Oct 31 16:34:06 2013 (5272786E) CheckSum: 0000FFE3 ImageSize: 0000A000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4[/quote]




Diagnostic Test

RAM TEST


Run MemTest86+ - Test RAM - Windows 10 Forums



Note



MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

 

Sorry, didn't read the rules...

Okay thanks! Gonna Try This when i get home!
I think i enabled verifier because of some posts in another Board...
Last night after 8 hours memtest had 0 errors, but i only 4 passes. Gonna run it again for a longer time.