Windows 10: Various BSOD codes during use and system shutdown & start-up

Hello readers,For the past months seemingly after getting new monitors, but this might be irrelevant I have been getting BSODs at unpredictable moments of using my PC, and sometimes too when shutting down or logging into Windows. Next to that, my PC often turns off during start-up, making me restart it twice for about half or the time. Might be related, might not.The BSOD codes are:- KERNEL_MODE_HEAP_CORRUPTION- IQRL_NOT_LESS_OR_EQUAL- PFN_LIST_CORRUPT- MEMORY_MANAGEMENT- UNEXPECTED_STORE_EXCEPTION- KMODE_EXCEPTION_NOT_HANDLED- QUOTA_UNDERFLOW- CRITICAL_PROCESS_DIED Some of these can be

:)

 

Windows 10 Various Problems

Hello All,

I know this has probably been asked a few times but just need some clarification if I could, I have the below problems in list form (I'm by no means a computer whiz but can follow steps *Smile)

- EVERYTIME Win10 Boots it takes about 15 minutes from start to my login screen
- Constant BSOD (sometimes on boot, and in general use)
- Can't shutdown with Start, Shutdown button (have to shutdown via taskmanager)
- Programs won't run from desktop or from program list (mainly Copytrans manager & ifunbox for music, other than that I mainly just watch movies or kids on youtube

Many thanks and will see what happens.

Cheers

 

System crash with various BSOD

Hi all

Sorry for the format but this is the first time I post here as I am starting to run out of options with my system crash.

Started around two days ago, and my desktop will crash randomly. Sometimes it crashed when I was away from the computer, and other times it will crash with various BSOD messages.

I used to overclock my system, but the system continues to crash when I return my bios system to default.

Initially, I thought it might be a driver problem, but after running the driver verifier, the system continues to crash. I also ran a memory test (Karhu ram test) to see if I have faulty memory, but it didn't crash the system.

Here is the link to my minidump and MSinfo:

Desktop Crash – Google Drive

I am thinking it is likely a hardware problem, likely memory or PSU, but would like if anyone can provide suggestions.

Thanks

 

BSOD error codes: 0x0000007e, 0x0000003b on Windows 10 operating system

Hi Sakkie,

As you are facing multiple BSOD errors on your device, do not worry we will help you with this issue.

Blue Screen errors (also sometimes called black screen errors or STOP code errors) can occur if a serious problem causes Windows to shut down or restart unexpectedly. You might see a message that says, "Windows has been shut down to prevent damage
to your computer”. These errors can be caused by both hardware and software problems.

Provide us additional information to assist you better:

• What is the make and model of your computer?
• Have you tried any troubleshooting steps to resolve the issue?
• Were you able to see any error message along with the error codes on your device?
• When exactly you get the BSOD errors on your computer?

Step 1: I suggest you to boot the device on Safe mode with networking (which boots the operating system with minimal set of drivers) and check if the issue persists.

Refer: Start your PC in safe mode in Windows 10


Step 2: If the issue persists,
I suggest you to test the issue by placing the computer in a Clean Boot state helps in eliminating software conflicts.

Disclaimer: Putting your system in
Clean Boot state helps in identifying if any third party applications or startup items are causing the issue. You need to follow the steps from the article mentioned below to perform a Clean Boot.

How to perform a clean boot in Windows

(Applies to Windows 10 as well)

Note: After troubleshooting, refer to the section “How to reset the computer to start as usual after troubleshooting with
Clean Boot” to return the computer to a
Normal startup mode.

Step 3: Follow the below steps to
place the computer in normal mode.

• Press Windows + R keys to open Run
  command.
• Type msconfig and press Enter.
• In the System Configuration window, click on
  General tab.
• Select Start-up selection as Normal startup, click on
  Apply and Ok.
• Follow onscreen instructions.

Hope it helps. Get back to us with an updated status of BSOD errors with the required information for further assistance.

Thank you.