Windows 10: Various BSOD types, already re-installed windows & ran memcheck

I've reinstalled windows (preserving only documents, programs were wiped along with windows)

I've replaced the RAM even after doing a memcheck boot disk

I've stressed the CPU, temp doesn't go above 70C, and CPU stress/heat does not trigger a BSOD

Different types of BSOD pop up in the last few months, always when the machine is sitting idle and I am away from it. There is no correlation between sleep/awake states and the BSOD.

I am at my last straw, might have to buy a new machine (despite that this one is plenty fast/modern)

Win 10 x64 19041.450

LOGS(2020-08-30_17-13-55).zip - Google Drive

:)

 

windows xp installation and dual core am

could someone please list the steps they follow to install windows with a dual core processor and windows xp service pack to. I'm reletively new to amd dual core and i feel i'm missing a step. All help will be appreciated. thanx

 

BSODs continue after clean install - hardware?

Hello,
I previously posted here regarding a variety of BSODs I was getting on my machine which included various stop codes:

• usbohci.sys
• faulty hardware corrupted page
• kernel security check failure
• memory management

After trying a bunch of things (including some good suggestions from the forum), I gave up and did a clean Win10 install. To be clear, this was a disk format, followed by a fresh/clean install using the Windows 10 .iso image from Microsoft. This is a new thread because I re-installed Windows 10.
To my astonishment, within a day of the clean install, I already got a BSOD, this time saying "Stop Code: Memory Management". This happened as soon as I woke the machine up from idle sleep. Starting to wonder if I have hardware issues. I have installed minimal things beyond the fresh windows copy, including latest Radeon video drivers, but I don't think that's it. I've run the memcheck and diskcheck utility a bunch of times, with no problems indicated. Welcome everyone's thoughts, and thank you again!

 

BSOD on install from USB

Have an HP Notebook 14-cf0013dx, 8gb ram, 1TB HDD 5200rpm (full specs are in profile)

Attempting to reinstall windows after BSOD on start, mostly page fault in non paged area BSOD error but can also be irql not less or equal, or Kernel Secure check failure. Saw another one or two but cannot recall at the moment.

Symptoms. Can boot to USB in UEFI or legacy and Load the windows 10 install made from the windows creation tool. The loading files completes. The system restarts and the HP splash screen appears with the windows 10 dots circling underneath for about 2 revolutions then a BSOD.

First steps:
Tried windows 10 recovery. over 48 hours still not completed.
Ran HP hardware diagnostics, Memory HDD, system board all passed.
Ran memtest86 from Hirens Boot CD. passed.
Ran seagate HDD test. passed.
Tried windows 10 USB install after each step above.
Tried Windows 10 safe mode installation, was able to get through installation but on reboot the same results, BSOD within 3 revolutions of startup dot-circle.

Second steps:
Removed HDD, hooked up to main computer and did a CMD, DISKPART, CLEAN
Updated BIOS to most recent version F.53 to support windows 10 v.1909
Moved DIMM from slot 1 to slot 2
Tried HP cloud recovery with exact same results as listed above.
Tried Windows 10 USB safemode install again same results. Was able to complete installation from USB but BSOD on restart.

Short of replacing the Motherboard due to the integrated graphics memory (which still tested good in HP system board test), I am at a loss. Please help with any suggestions.