Windows 10: Various Recurring BSOD Errors

Hello, I've been getting various BSOD errors for the last 5 months and I couldn't find any reason or solution yet.There are 5 Critical error logs on the Event Viewer since 3 weeks ago. Those error's sources are Kernel-Power and Event ID is 41. Last critical error's details.I've got SYSTEM_SERVICE_EXCEPTION, UNEXPECTED_KERNEL_MODE_TRAP and more I couldn't remember. Last BSOD's Minidump. Unfortunately, I don't have Minidumps for the previous ones.I've tried "Reset this PC", MemTest86 and Dell's system diagnostics tool but nothing was found.Dell G3 3779 i7 and 1050Ti versionWindows 11 Pro 22H2,

:)

 

Various BSOD Errors Help

Hey all,

I've received multiple BSOD errors the past 2 days after rebuilding my PC. I've been trying to figure out the issue.

These are the few BSOD messages I remember seeing:

• DPC_WATCHDOG_VIOLATION (multiple times)
• CRITICAL_PROCESS_DIED (one time)
• IRQL_NOT_LESS_OR_EQUAL (one time)
• WHEA_UNCORRECTABLE_ERROR (multiple times)

Here's a link to the dmp files and system information: WindowsIssue

Steps I've taken:

• fully updated drivers
• applied all Windows updates
• Removed unnecessary hardware
• Monitored CPU/GPU temps (log file on temps during last crash in share)

Any help would be appreciated.

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.