Windows 10: Varying BSOD errors on fresh build and install

I completed the build last night and installed Windows 11 Home with no issues. I then installed some applications that I'd need for work in the morning, verified that they worked, and went to sleep. This morning, after booting up the PC, I was presented with a BSOD during the boot process. After several restarts, I continued to be presented with these errors. Each time the error code varied.I resolved to create a fresh install of Windows 11 and start over, but I then continued to get the BSOD during the Windows installation process. I attempted to swap to Windows 10 suspecting it may be a

:)

 

KMODE_EXCEPTION_NOT_HANDLED on fresh install. Safe mode works fine.

Version 2004 (OS Build 19041.508)Attachment 297834
Error: KMODE_EXCEPTION_NOT_HANDLED
This is a fresh install of windows. The only thing that has been installed is the video card driver & software.

Note: I can only run windows in normal mode for a couple minutes before I get BSOD. The included log .zip file is while I am in safe mode. I DO NOT GET BSOD IN SAFE MODE.

Things I have already tried:

• Uninstalling then updating my video card drivers.
• Clean boot.
• Removing any unnecessary hardware e.g. web cam, card reader

I still hit the same error every time. Sometimes the BSOD comes in a few seconds, other times I can use my PC for up to 10 minutes before getting it. Usually it is sometime in 3-5 minutes after logging into Windows.
Originally I was getting this BSOD error and in my troubleshooting I made things worse to the point my drive would not launch windows and all repair attempts failed. So I gave up and used my other hard drive and did a fresh install of Windows. I am getting the same error that I was before, KMODE_EXCEPTION_NOT_HANDLED.

I have done various troubleshooting steps but am willing to start from scratch to narrow down if this is hardware and if so what piece of hardware.

For context here is some of the programs I have tried and the summarized outcome:

• Driver Verifier - No issues
• sfc - corrupt files detected that were unrepairable (CBS LogAttachment 297844)
• dism - no corruption detected

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.

 

7 different BSoD

Hey guys,

I have a serious problem. I make it as short as possible:

• system runs 100 % fine with the 10.12
• updatet to Catalyst 11.1 -> BSoD
• updatet to 11.1 Hotfix -> BSoD
• rollback to 10.12 -> BSoD
• removed ALL AMD files manually, installed 10.12 -> BSoD

• Temps are fine
• no sfc /scannow errors
• no chkdsk errors
• Prime, Furmark all fine
• regardless what driver I install -> BSoD
• I did no hw changes, no OC

Here are my BSoDs I receive:

• 0x0000010e
• 0x1000007e
• 0x0000007e
• 0x0000004e
• 0x0000003b
• dxgmms1.sys
• PFN_LIST_CORRUPT

They all refer to the GPU of course ...

From now on I receive a BSoD every time I try to play a game (especially BC2 and SC II) even if I completely remove the old driver and make a clean install.
Apparently the 11.1 damaged my system irreparable.

Any advice or info would be very much appreciated *Smile