Windows 10: View Poll Results: Does your windows 10 Pro install contain all 19 User Groups or just 11

I have two installs of win10 Pro. One was a clean install and one was upgraded to Pro from Home in a VM. I found I could not add Remote Desktop users to my upgraded version because groups were missing.

So take a look under Computer Management --> System Tools -->Local users and Groups --> Groups and report what you find

Which does it look like? I have one of each





OR





:)

 

Sign the petition?!

so karim, will we see Nokia act on the results or was the poll just posted for a bit of fun to gauge everyones view on this subject?

i mentioned earlier that Series 60 version 3, feature release 1 has the ability to have the F/W updated by the user so will we see this option included in future handsets? even if only a small number of people wanted to do this by themselves, it would still
save nokia time and money?

Hi Rich!

This poll isnt just a bit of fun, I was hoping to stimulate a bit of discussion on the subject. The results from the poll are interesting, it is not the landslide that many people who visit here were expecting. With on %59 of people actively seeking firmware
updates this still leaves a large group of owners who would require some assistance on updating their firmware, with two days to go the results could change either way. And again, this only gauges the opinion of people who visit these discussion boards - there
will be many many Nokia owners who have not read this post.

But, this poll isnt the official Nokia standpoint of firmware installation. The poll and this thread are what you, the users think and feel.

Carry on and make posts here to discuss this, and feel free to make a vote. The poll will close on Friday afternoon. I will collate the results and put them in this thread for further discussion.

Cheers

-

Karim

 

Cannot upgrade Windows 10 from build 10565 to the latest TH2 (Setuperr.log saved)

When I start the setup in Windows 10, it performs smoothly and "correctly" until first time reboot. Upon the progress hits 100% and needs a restart, a dialog appears saying "Something wrong: the installation has failed". I have tries several times and even
several builds, and has the same problem.

I don't want to perform a clean install, where I have to re-install all my apps. Could anyone tell me what are the fatal errors recorded in this SETUPERR.LOG file that keep the installation failed and any solutions available?

It seems there are many errors... but I hardly think that every error is fatal...

2015-11-19 16:05:56, Error CONX Windows::Compat::Appraiser::Utilities::SendRequest (1070): Failed to connect to the internet: [12007][gle=0x80072ee7]

2015-11-19 16:05:56, Error CONX Windows::Compat::Appraiser::Utilities::ResolveForwardLink (1134): Failed to send request using default proxy[gle=0x80072ee7]

2015-11-19 16:05:56, Error CONX Windows::Compat::Appraiser::Utilities::SendRequest (1070): Failed to connect to the internet: [12007][gle=0x80072ee7]

2015-11-19 16:05:56, Error CONX Windows::Compat::Appraiser::Utilities::ResolveForwardLink (1140): Failed to send request using auto proxy[gle=0x80072ee7]

2015-11-19 16:05:56, Error CONX Windows::Compat::Appraiser::CosDeviceDataSource::Initialize (93): Could not resolve COS FwLink: [0x80072ee7].[gle=0x80072ee7]

2015-11-19 16:05:56, Error CONX Windows::Compat::Appraiser::SetupAppraiser::InitializeDataSourceComponents (1521): Failed to initialize, swallowing error: [0x80072ee7].[gle=0x80072ee7]

2015-11-19 16:06:37, Error CONX Unable to get message handle 80092009 c:\windows\system32\drivers\intelhaxm.sys
2015-11-19 16:06:40, Error CONX Failed to get inf path SYSTEM\CurrentControlSet\Control\Network\{4d36e975-e325-11ce-bfc1-08002be10318}\{53565350-564d-0000-5f3f-d83712cde83d}
2015-11-19 16:06:40, Error CONX Failed to add net component 80070002
2015-11-19 16:06:40, Error CONX Failed to open inf key SYSTEM\CurrentControlSet\Control\Network\{6bdd1fc5-810f-11d0-bec7-08002be2092f}\{2a85ecd8-1a95-41cd-84d2-a3dc7049c876}
2015-11-19 16:06:40, Error CONX Failed to add net component 80070002
2015-11-19 16:13:47, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\MSSQLServerOLAPService. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:13:47, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\ReportServer. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:13:47, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\MSSQLFDLauncher. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:13:47, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\MsDtsServer120. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:13:47, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\MSSQLSERVER. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:13:53, Error SP pSPRemoveUpgradeRegTree: failed to delete reg tree HKLM\SYSTEM\Setup\Upgrade[gle=0x00000005]

2015-11-19 16:13:58, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\MSSQLServerOLAPService. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:13:58, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\ReportServer. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:13:58, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\MSSQLFDLauncher. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:13:58, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\MsDtsServer120. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:13:58, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\MSSQLSERVER. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:14:03, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: "id" attribute is mandatory. void __cdecl Mig::CMXEMigrationXml::LoadSupportedComponent(class UnBCL::XmlNode *,int,class Mig::CMXEMigrationXml *,class Mig::CMXEXmlComponent
*)

2015-11-19 16:14:07, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{39CC25F3-AF21-4C42-854D-0524249F02CE} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class
UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)

2015-11-19 16:14:31, Error CSI 00000001 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #244390# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216 (0x00060000), status = [6]"(null)", value = { type: 40972 (0x0000a00c),
bytes ( 12 (0x0000000c) ): 65006e002d00550053000000 })

[gle=0x80004005]

2015-11-19 16:15:15, Error [0x0808fe] MIG Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d

2015-11-19 16:15:18, Error CSI 00000002 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #702791# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216 (0x00060000), status = [6]"(null)", value = { type: 40972 (0x0000a00c),
bytes ( 12 (0x0000000c) ): 65006e002d00550053000000 })

[gle=0x80004005]

2015-11-19 16:15:25, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\MSSQLServerOLAPService. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:15:25, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\ReportServer. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:15:25, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\MSSQLFDLauncher. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:15:25, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\MsDtsServer120. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:15:25, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\MSSQLSERVER. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:17:49, Error [0x0808fe] MIG Plugin {526D451C-721A-4b97-AD34-DCE5D8CD22C5}: [shmig] Failed to get preferred homegroup with hr=0x80070490

2015-11-19 16:17:49, Error [0x0808fe] MIG Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0

2015-11-19 16:21:05, Error CSetupAutomation::Resurrect: File not found: C:\$WINDOWS.~BT\Sources\Panther\automation.dat[gle=0x00000002]

2015-11-19 16:21:05, Error SP CSetupPlatform::ResurrectAutomation: Failed to resurrect automation: 0x80070002[gle=0x00000002]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(String) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(String) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(String) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(String) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(String) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005][gle=0x00000002]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005][gle=0x00000002]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005][gle=0x00000002]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:05, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmStartTime returned: [0x80004005]

2015-11-19 16:21:05, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\MSSQLServerOLAPService. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:21:05, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\ReportServer. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:21:05, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\MSSQLFDLauncher. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:21:05, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\MsDtsServer120. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:21:05, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\MSSQLSERVER. NetUserGetLocalGroups failed 0x000008AD

2015-11-19 16:21:09, Error [0x064199] IBSLIB SetCheckpoint(WinPEBootFilesRestoreCheckpoint): threw exception.: Win32Exception: \\?\E:\EFI\Microsoft\Boot\en-GB\bootmgfw.efi.mui dir copy to \\?\C:\$WINDOWS.~BT\Sources\Rollback\EFI\Microsoft\Boot\en-GB\bootmgfw.efi.mui:
The file or directory is corrupted and unreadable. [0x80070570] void __cdecl UnBCL:irectory::Copy(const class UnBCL::String *,const class UnBCL::String *,int,struct UnBCL:irectory::ICopyDelegate *)

void __cdecl UnBCL:irectory::Copy(const class UnBCL::String *,const class UnBCL::String *,int,struct UnBCL:irectory::ICopyDelegate *)[gle=0x00000012]

2015-11-19 16:21:09, Error [0x06418a] IBSLIB RollbackSetCheckpoint(WinPEBootFilesRestoreCheckpoint): threw exception.: Win32Exception: \\?\E:\EFI\Microsoft\Boot\en-GB\bootmgfw.efi.mui dir copy to \\?\C:\$WINDOWS.~BT\Sources\Rollback\EFI\Microsoft\Boot\en-GB\bootmgfw.efi.mui:
The file or directory is corrupted and unreadable. [0x80070570] void __cdecl OSRollbackService::CCheckpointImpressario::SetCheckpoint(const unsigned short *,struct OSRollbackService::ICheckpointParameters *)

void __cdecl UnBCL:irectory::Copy(const class UnBCL::String *,const class UnBCL::String *,int,struct UnBCL:irectory::ICopyDelegate *)

void __cdecl UnBCL:irectory::Copy(const class UnBCL::String *,const class UnBCL::String *,int,struct UnBCL:irectory::ICopyDelegate *)[gle=0x00000012]

2015-11-19 16:21:09, Error [0x06414e] IBSLIB RollbackSetCheckpoint(WinPEBootFilesRestoreCheckpoint) failed. Disabling Rollback.[gle=0x00000012]

2015-11-19 16:21:09, Error SP Error setting OS Switch Rollback checkpoint[gle=0x00000012]

2015-11-19 16:21:09, Error SP Operation failed: Update Boot Code. Error: 0x80004005[gle=0x000000b7]

2015-11-19 16:21:09, Error MOUPG MoSetupPlatform: Finalize reported failure![gle=0x000000b7]

2015-11-19 16:21:09, Error MOUPG MoSetupPlatform: Using action error code: [0x80004005][gle=0x000000b7]

2015-11-19 16:21:09, Error MOUPG CDlpActionFinalize::ExecuteSetupPlatformFinalize(1310): Result = 0x80004005[gle=0x000000b7]

2015-11-19 16:21:09, Error MOUPG CDlpActionFinalize::ExecuteRoutine(479): Result = 0x80004005

2015-11-19 16:21:09, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:09, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:09, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmEndTime returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Execute(441): Result = 0x80004005

2015-11-19 16:21:23, Error MOUPG CDlpTask::ExecuteAction(3243): Result = 0x80004005

2015-11-19 16:21:23, Error MOUPG CDlpTask::ExecuteActions(3397): Result = 0x80004005

2015-11-19 16:21:23, Error MOUPG CDlpTask::Execute(1631): Result = 0x80004005

2015-11-19 16:21:23, Error MOUPG CSetupManager::ExecuteTask(2024): Result = 0x80004005

2015-11-19 16:21:23, Error MOUPG CSetupManager::ExecuteTask(1987): Result = 0x80004005

2015-11-19 16:21:23, Error MOUPG CSetupManager::ExecuteInstallMode(804): Result = 0x80004005

2015-11-19 16:21:23, Error MOUPG CSetupManager::ExecuteDownlevelMode(389): Result = 0x80004005

2015-11-19 16:21:23, Error SP CSetupPlatform::ResurrectNewSystem: Cannot resurrect new system.: Win32Exception: \\?\C:\$Windows.~BT\Sources\NewSystem.dat: The system cannot find the file specified. [0x00000002] __cdecl UnBCL::FileStream::FileStream(const
class UnBCL::String *,enum UnBCL::FileMode,enum UnBCL::FileAccess,enum UnBCL::FileShare,unsigned long)[gle=0x00000002]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(String) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(String) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(String) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(String) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(String) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005][gle=0x00000002]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005][gle=0x00000002]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005][gle=0x00000002]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:23, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]

2015-11-19 16:21:24, Error MOUPG CSetupManager::Execute(232): Result = 0x80004005

2015-11-19 16:21:24, Error MOUPG CSetupHost::Execute(371): Result = 0x80004005

 

Windows 10 will create the user groups when it needs them. If it hasn't needed that user group before, it likely won't be there. When it needs it, it will create it. Hyper-V administrators won't be there until you do something that requires virtualization. Remote Desktop Users won't be there until you start the Remote Desktop host service.

 

This, is good to know, for now I can't add users to the Remote Desktop users group in my VM.

 

My remote desktop is very limited, only I sign in with my Microsoft account and only from within my LAN so I never had to mess with adding any other users to the Remote Desktop group.

 

I just don't like running any PC with the Admin account. However, I will admit the windows 10 admin account security does seem improved.

 

18 here. Does it matter?

 

I was just trying to get an idea of how many were 1st included when a clean install was done, at least one of my services doesn't work.

 

Well my problems seemed insurmountable, so I did a "reset pc" and now I see 18 groups. I checked these things right after install, so they seem like defaults. Below is my screenshot:





NavyLCDR do you see in remote desktop, in System Properties --> Remote in the box that says allow connections from pcs with network level authentication, if select users grayed out? It was for me, causing me lots of problems, it is no longer grayed out.

 

This is my desktop computer which is running RDP host:




These are the same computer's user groups. This computer was also a clean install of Windows 7 Pro. I don't know what user groups existed before I enabled RDP hosting, though:




Select users is enabled, when I click on it I have no users listed and a note that says my Microsoft account login already has remote access.

 

Ok, well you really confused me when you posted the screenshot in this thread: Solved How to upgrade and activate Win 10 Home N(unactivated) to Win 10 Pro N - Page 2 - Windows 10 Forums

Was that image not from your pro install like you implied?

 

The screenshot in the other post is from my laptop with Windows 10 Pro installed which was a clean install. The difference is that the laptop has never had RDP host service started on it. Laptop is client, desktop is host, both are Windows 10 Pro.

 

So I started the RDP Hosting service on my laptop and I got the additional user groups automatically. However the "Select Users" button is greyed out on my laptop. But, I only have one user account established on my laptop, so that might be why it is greyed out. I have two user accounts setup on my desktop, I suspect that is why the button is active on the desktop.

 

I am not so sure, I would try adding another account on the laptop just to see, you can always delete them after. For me I had started RDP services and it was always grayed out. This is an issue myself and at least two others have had when upgrading from win 10 home to pro.