Windows 10: Viewsonic Driver

Discus and support Viewsonic Driver in Windows 10 Drivers and Hardware to solve the problem; Dear all, I'm trying to install the driver for a Viewsonic VX3209-2K monitor: VX3209-2K 32" QHD LCD monitor - LED Display - Products - ViewSonic... Discussion in 'Windows 10 Drivers and Hardware' started by jessicac, Jan 9, 2017.

  1. jessicac Win User

    Viewsonic Driver


    Dear all,

    I'm trying to install the driver for a Viewsonic VX3209-2K monitor:
    VX3209-2K 32" QHD LCD monitor - LED Display - Products - ViewSonic

    However, the installations was failed. I have tried these drivers with compatibility settings, but none of them works.

    Standard Monitor Driver Signed Windows 7 x64
    Standard Monitor Driver Signed Windows 8 x64

    Standard Monitor Driver Signed Windows 10 x64

    Standard Monitor Driver Unsigned Windows x64


    It would be great if someone could lend a helping hand, thank you.

    Best regards,
    Jessica

    :)
     
    jessicac, Jan 9, 2017
    #1

  2. Viewsonic monitor compatibility with Windows 10

    I've just upgraded to Windows 10 from Windows 7, and I'm using a Viewsonic VA2231wm-LED monitor. Once Windows 10 was booted up, I discovered I cannot set the resolution to the recommended 1920x1080. Viewsonic doesn't seem to have a driver available for this
    monitor and Windows 10. Is there anything I can do besides wait until Viewsonic develops an appropriate driver, or buy a new monitor that will give this resolution in Windows 10?

    Thanks for your help!
     
    Mark Schneider 52, Jan 9, 2017
    #2
  3. Multiple Monitors

    i upgraded to windows 10 and now I cannot use the viewsonic hdmi led monitor I bought a few years ago. It is a ViewSonic.

    I went to their site, but there is no driver for windows 10, since it is older. When I look for the viewsonic under device manager all i see is the generic pnp monitor. Windows 10 does not recognize the viewsonic. Is there anything I can do? I would
    rather use my large monitor rather than the 15 inch laptop monitor.
     
    ElaineWachtel, Jan 9, 2017
    #3
  4. spunk Win User

    Viewsonic Driver

    Windows provides drivers for your Viewsonic monitor, it does not require separate driver installation.
    Where do you plug your monitor into? Do you use the onboard Blue VGA or White DVI port on the back of the computer?
    Or do you have a separate Video card lower in the case, With VGA, DVI or HDMI? Have you installed the drivers for your Video card?
     
    spunk, Jan 10, 2017
    #4
  5. jessicac Win User
    Hi Spunk,

    Thank you for your reply.

    Currently, I'm using Intel's motherboard DH77EB and Intel's core i5 3470 @ 3.2Ghz. I've contacted Intel and they said that both supports 2K resolution. However, the maximum resolution I can get is only 1920 x 1080px. I have tried to update the driver via windows update, it shows that I'm already using the latest driver.

    Intel asked me to install the driver from Viewsonic. Unfortunately, none of the driver listed above work for me.

    I'm using HDMI port on the DH77EB, I don't have any separate graphic card.

    Thank you.

    Best regards,
    Jessica
     
    jessicac, Jan 10, 2017
    #5
  6. spunk Win User
    You would download any drivers from the Intel Drivers site for your model:
    Download the HD Graphics driver for Windows 8.1, choose your version of Windows, (ie)32bit or 64 bit Download Graphics: Intel(R) HD Graphics Driver for Windows 8.1* Download then Extract the driver file and save it to your Download location. Open the file find Setup.exe., Right click it and choose Properties/Compatibility, make it compatible with Windows 8.1, Run As Administrator.
     
    spunk, Jan 10, 2017
    #6
  7. From what I've found to date, the "driver" you get from your monitor vendor doesn't install a h/w device driver. It installs a color profile for your monitor. I looked at a couple of drivers you listed. Look like they install a (.PAL) file (color palette). I've seen other monitor "drivers" install an .ICC file. (International Color Consortium)

    If you already like the color on your monitor you don't really need a color file. Even if you can't find one, your monitor will run just fine without. Do the manual adjustments without it
     
    ComputerGeek, Jan 10, 2017
    #7
  8. jessicac Win User

    Viewsonic Driver

    Hi Spunk,

    Thank you for your reply.

    I've downloaded and installed the driver as per instructed. However, I'm still unable to set the 2K resolution.

    Viewsonic Driver [​IMG]

    Viewsonic Driver [​IMG]

    Viewsonic Driver [​IMG]


    Thank you.

    Best regards,
    Jessica
     
    jessicac, Jan 10, 2017
    #8
  9. jessicac Win User
    Hi ComputerGeek,

    Thank you for your reply.

    The color works great for the monitor. The main problem is the resolution. In that case, may I know how to make manual adjustments to have 2k resolutions?

    Currently, the maximum I can get is only 1920x1080px.

    Thank you.

    Best regards,
    Jessica
     
    jessicac, Jan 10, 2017
    #9
  10. So
    • Your color is great. There's no value finding the Viewsonic driver then.
    • I think it's all about the graphics card and driver as Spunk has been looking for
    • Are you running latest BIOS? I'd also reinstall the latest chipset drivers
    • The Intel message "Bandwidth Exceeded" makes me wonder if the board really supports higher resolution you want
    • If it appears the Intel onboard can't do the job, I'd get and try an add-on card. Are you close to a brick and mortar computer store? Ask for an add-on card that supports what you need. And check on their return policy, if there are still issues.
     
    ComputerGeek, Jan 10, 2017
    #10
  11. I have to ask, what type of HDMI cable are you using and what HDMI standard does it support. HDMI cables are not created equally and when I see Bandwidth Exceeded I start to wonder. The issue gets worst as the cable length increases.
     
    Caledon Ken, Jan 10, 2017
    #11
  12. Helmut Win User
    Hi,
    The 'driver' as such usually contains an *.INF file and a colour profile *.ICM. Windows 10 updates did that for my monitor, also you can get it from the manufacturer. It tells Windows capabilities like resolutions so it may help.

    Not entirely necessary with modern monitors as the information is sent from the monitor itself.
    To see whether this has been installed:
    Settings > System > Display > Advanced display settings > Colour settings > Colour Management > Devices Tab. If your monitor's ICM profile is in there then the 'driver' as such is installed, no worries.

    DisplayPort connection maybe better. There maybe some limitation on the HDMI port.

    You will have to look up that MOBO, CPU/iGPU/H77 chipset and indeed the HDMI and DisplayPort specs.

    Intel HD Graphics Driver is here, make sure it's the right one, Intel's downloads are very confusing.
    Download Intel(R) Graphics Driver for Windows(R) 10 and Windows 7*/8.1* [15.33]-
     
    Helmut, Jan 10, 2017
    #12
  13. Viewsonic Driver

    To best my knowledge, color profiles only define color control and rendering.

    I took a another look online at .ICC and .ICM overviews and specs. I don't find any reference to resolution. IMHO I don't think the OP need worry about finding a color profile to resolve the problem at hand
     
    ComputerGeek, Jan 10, 2017
    #13
  14. jessicac Win User
    Dear all,

    Thanks for all of the recommendations. I will change the connection using display port first. If still can't work, I might get one add-on graphic card.

    Thank you.

    Best regards,
    Jessica
     
    jessicac, Apr 5, 2018
    #14
Thema:

Viewsonic Driver

Loading...
  1. Viewsonic Driver - Similar Threads - Viewsonic Driver

  2. ViewSonic monitor older model shows wrong aspect ratio on Windows 11 laptop

    in Windows 10 Gaming
    ViewSonic monitor older model shows wrong aspect ratio on Windows 11 laptop: I have an old ViewSonic monitor VA2012wb which is displaying fine on a laptop running Windows 10. On a separate laptop running Windows 11, it allows me to select the correct resolution 1020x1080 but it displays the wrong aspect ratio - see below. I even tried the other...
  3. ViewSonic monitor older model shows wrong aspect ratio on Windows 11 laptop

    in Windows 10 Software and Apps
    ViewSonic monitor older model shows wrong aspect ratio on Windows 11 laptop: I have an old ViewSonic monitor VA2012wb which is displaying fine on a laptop running Windows 10. On a separate laptop running Windows 11, it allows me to select the correct resolution 1020x1080 but it displays the wrong aspect ratio - see below. I even tried the other...
  4. My viewsonic vx3211 monitor's native resolution does not appear in display settings.

    in Windows 10 Gaming
    My viewsonic vx3211 monitor's native resolution does not appear in display settings.: My viewsonic vx3211 monitor's native resolution does not appear in display settings. https://answers.microsoft.com/en-us/windows/forum/all/my-viewsonic-vx3211-monitors-native-resolution/59ae7538-dad4-457d-b815-5676214d5514
  5. My viewsonic vx3211 monitor's native resolution does not appear in display settings.

    in Windows 10 Software and Apps
    My viewsonic vx3211 monitor's native resolution does not appear in display settings.: My viewsonic vx3211 monitor's native resolution does not appear in display settings. https://answers.microsoft.com/en-us/windows/forum/all/my-viewsonic-vx3211-monitors-native-resolution/59ae7538-dad4-457d-b815-5676214d5514
  6. Viewsonic XG320Q

    in Windows 10 Gaming
    Viewsonic XG320Q: I have the display operating but I can't get the speakers on the monitor to work. I tried optional updates from Windows update. There was a Viewsonic driver but still no sound....
  7. Viewsonic XG320Q

    in Windows 10 Software and Apps
    Viewsonic XG320Q: I have the display operating but I can't get the speakers on the monitor to work. I tried optional updates from Windows update. There was a Viewsonic driver but still no sound....
  8. Windows 11 will not recognize Viewsonic PA503W Projector Native display shows up as non PNP...

    in Windows 10 Gaming
    Windows 11 will not recognize Viewsonic PA503W Projector Native display shows up as non PNP...: I have a Win 11 PC that will not recognize a Viewsonic PA503W Projector's native display. It shows up as non PNP Monitor and I cannot change the resolution in Display Settings because it is greyed out. There are no drivers for this projector to install. The website does not...
  9. Windows 11 will not recognize Viewsonic PA503W Projector Native display shows up as non PNP...

    in Windows 10 Software and Apps
    Windows 11 will not recognize Viewsonic PA503W Projector Native display shows up as non PNP...: I have a Win 11 PC that will not recognize a Viewsonic PA503W Projector's native display. It shows up as non PNP Monitor and I cannot change the resolution in Display Settings because it is greyed out. There are no drivers for this projector to install. The website does not...
  10. display driver stopped working in viewsonic monitor

    in Windows 10 Drivers and Hardware
    display driver stopped working in viewsonic monitor: Hello all, my ViewSonic monitor VG2448 is running on windows 10 and my display drivers stopped working. From where I get display drivers so that my PC starts working again? Help would be appreciated. Thanks in advance. 167251

Users found this page by searching for:

  1. nu vot

    ,
  2. vx3209 audio problem

    ,
  3. viewsonic vx3209 2k driver download