Windows 10: Virus blocks Boot and reset

I didnt now it was a Virus i just booted up my PC and i got an error your pc ran into a problem on blue screen then i clean installed Windows with a USB and when i install it at 30% i get the same error again and now i dont have and Windows on my PC and can only go in the bios

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Boot Process

Hi,

Please suggest me a link that can explain the boot process step by step of ...

• Windows 7,
• Windows 8.1,
• Windows 10,
• Windows Server 2008 R2 and
• Windows Server 2012 R2

With Regards

InTech

 

browser waring of virus blocking edge

Edge Browser Adware

See post of GreginMich here: Redirecting

If your issue continues see this free multi-step removal guide from Malwaretips.com: http://malwaretips.com/blogs/remove-tech-support-scam-popups/

You may not need to scan with Zemana or Hitman Pro (note that both are available in trial versions if you do need them). If scanning with AdwCleaner (step 1) and Malwarebytes Free (step 3) does not resolve your issue, you may
need to reset your browsers as suggested in step 5.