Windows 10: Voicechat breaks randomly by speeding up

Hi, so I'm not sure why exactly this is happening, but whenever I try to use voicechats, like Discord or In-Game ones, at some point it breaks and my voice get's all sped up to the point where it's impossible to understand for the other people. On Discord it happenes when starting a stream or clicking on other applications, on the games it happens randomly. I did have to change some components of my PC just before those issues happened, so Im thinking it might have something to do with that. For example, Windows now complains it hasn't been activated, so I'm guessing it could be an anit piracy

:)

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

Windows 10 Pro and Ergnomic Break Reminder

Hi,



Apologies for the late reply.



Do you remember installing any break reminder software?



It looks like it is a pop up from a break reminder software.



I suggest you to look for this in Programs in features and uninstall it if do not use it.



Try the following steps:

• 
  Press Windows + R keys to open Run Command
  
• 
  Type Appwiz.cpl and hit enter
  
• 
  Search for the programs and un-install it.
  

Regards,

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".