Windows 10: Vrituel Disk issues Storage Pool

i,i'am new in this forum and i don't have enough expertise in the domain of storage Pool i have an issue since last week with my server i have created a storage pool from Windows servers 2019 with 8 nas behind it and every nas have 4 disks so all the disks are healthy and fine so the server is connected to the nas via Iscsci to the disks the virtual disk was working fine since last year and since last week suddenly one of the nas appeared with yellow triangle i thought that it was the connection via Iscsci that was not done after checking i saw that the isci was ok but the triangle didn't

:)

 

How to remove external hard disk from storage pool on Windows 10

Hi Velen,

Thank you for posting in Microsoft Community.

I understand your concern about removing the external hard disk from storage pool, we will help you with this issue.

Try the below steps to: Remove a physical disk by using Windows PowerShell
and check if it helps.

• 
  Press Windows
  key from the keyboard, type Windows PowerShell and select
  Run as administrator.
  
• 
  Enter the command replacing <diskname> with the disk name:
  

• • 
    Set-PhysicalDisk -FriendlyName <diskname> -Usage Retired
    

(If the pool is clustered, you will need to run this command on the cluster node which has the cluster resource for the pool online.)

3. Prior to performing step 5, you must wait for all active repair jobs to complete. To monitor the status of repair jobs, type the following command:
Get-StorageJob

4. Type the following command: Remove-PhysicalDisk -FriendlyName <diskname>

5. Physically disconnect the old disk.

For further reference: Storage Spaces Frequently Asked Questions (FAQ)

Hope it helps. Reply to the post with an updated status of this issue for further assistance.

 

Storage pool does'nt show my disks

Hello,

I have a wired problem I’m trying to install Hyper-V 2016 on an IBM x3550 m5 model 8869 machine to create a cluster afterwards

and test the direct storage pool from Microsoft installation goes fine for both servers and my disk are visible thought the disk manager

I ‘m using two disk that I use for software mirroring which is fine and the rest of the disk so 6 left I want to create a storage pool

the problem is that when I click in storage pool to create a new pool the disk are no visible all my disk are still not unallocated so it should be fine but I’m stuck with this problem since two days I’m not able to found out what's is causing this issue



Thank you for your help

 

Storage pools, update pool with RAID10

Hello,

So i got RAID10 done with storage pools combined with disk managment (4 drives, 2 mirrored pools done by windows storage spaces and then stripped partitions made by disk managment, creating "cheated" raid10), and i recently discovered that in storage spaces
window, i got info that i can update my pools to gain additional options.

My question is: is is safe for my "cheated" RAID10 array if i update the pools? I mean, if i do it, will storage pools recognize each other and disk managment will recreate my stripped partitions?

Please help, thank you.