Windows 10: W10 Automatic repair - windows\system32\ntoskrnl.exe

A few weeks back my laptop suddenly started doing Automatic Repair and got stuck in the dreaded loop. Following some advice, I was able to use a USB flash drive, change the boot order to read USB first to run a Windows check. I did this yesterday and it showed:The operating system couldn't be loaded because the kernel is missing or contains errors.File: \windows\system32\ntoskrnl.exeNow, I don't have a Windows CD or anything and I can't find any repair discs as I've had the laptop for a few years now.Can you advise what I can do. Please bear in mind I can't get past Automatic Repair loop to

:)

 

BSOD ntoskrnl..exe+1b35e0

Hi, KirbyBakken

My name is Maritza and I am an Independent Advisor. I would be happy to help you today.

Check this link, I hope it helps

https://www.thewindowsclub.com/ntoskrnl-exe-hig...

Note: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised
on the site before you decide to download and install it.

Let us know if these steps help you to resolve the issue.

 

Ntoskrnl BSOD

• Update your Realtek audio driver.
• Update your computer.
• Disable overclocking settings.
• Turn off BlueStacks/ another Android emulator.
• Clean your registry.
• Check your disk for errors.
• Fix bad memory issues.
• Remove faulty sticks of RAM.
• I hope these methods help you!
• Regards,
• Lewis
  
  * Added by Moderator: Information from
  https://windowsreport.com/windows-8-bsod-ntoskrnl-exe/
  
  * Moderator note: Advice given on this page might or might not be safe and/or effective but there are programs usually classified as PUP's (Potentially Unwanted Programs) being pushed that should not be downloaded or installed.
  

 

Windows 10 random automatic repair after changing boot priority.

Hello. So i have an Windows 10 Pro. Sometimes when i am changing in bios boot order from USB to HDD ( SDD ) windows starts booting with AUTOMATIC REPAIR and then restarting. Is this something with BIOS \ Windows 10 bug related? Tested on pc and on laptop , and sometimes it doing the same.


Situation on PC first,listen:

Few days ago after i change boot in UEFI BIOS from USB to SSD.
Then Windows 10 showed at 1 boot Automatic Repair.
When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc.
Interesting is that if I restart Windows (after procedure mentioned earlier) it will boot normally. This startup problem was occured only when starting system again after shutdown or restarted pc from windows.So i was needed 2 boots to boot properly to windows.
But on pc, format was needed to remove completely issue and after format is fine.

Pc :
2x8gb Kingston Hyperx 1600mhz DDR3
SSD samsung Evo 250 gb
4790k stock
Asus Sabertooth Z97 Mark 2 with UEFI BIOS


Now laptop with old standard bios:
On laptop i made the same operation, change boot from USB to HDD and on first boot Windows 10 shows Automatic Repair. But it happened once and i cant reproduce. No format was needed.

laptop is very old with 2gb ram

Why on pc format was needed when on laptop not?



Thanks for suggestions.