Windows 10: Wake On Lan WoL

Hi I was doing Wake On Lan Wol but i don't know how to set up please help me and my motherboard is American Megatrends I use S1 Because it don't support s2/s3/s4 The app called Wake On Lan I use android

:)

 

Troubleshooting Wake On Lan

I’ve been spending my sunday trying to figure out why Wake on Lan won’t work on my Razer Blade 2015 running Windows 10 19044.2130. I’ve tried all the steps in https://thegeekpage.com/wake-on-lan-not-working/ guide to no success. The manual for the laptop describes it as simple as disabling fast startup which I tried doing (as it is one of the suggestions in the link above). I’ve also tried each solution with two separate WoL activators, and tried using both wired and wireless connections between my router and the machine that’s supposed to wake up.

What can I have missed? Could it be a router issue? I’m simply out of luck.

 

Wake on lan not working anymore

Hi,

Previously I'm using windows 10 and wake on lan works fine. But last year I do a in place upgrade to windows 11, then wake on lan never works again.

I tried all steps I found from internet, nothing helps.

Is there something changed in windows 11? and how could I bring WOL back to my PC?

thanks!

 

WOL Wake on Lan not working after upgrade from windows 8.1

Hi Chris and Jessen P,

The setting for the soft off S5 state if your bios supports it:

Look at this artikel:

https://msdn.microsoft.com/en-us/library/windows/desktop/aa373229(v=vs.85).aspx

It claims:


"Wake-on-LAN behavior

The wake-on-LAN (WOL) feature wakes the computer from a low power state when a network adapter detects a WOL event (typically, a specially constructed Ethernet packet).

The default shutdown behavior puts the system into hybrid shutdown (S4) and all devices are put into D3. Remote wake from hybrid shutdown (S4) or classic shutdown (S5) is completely unsupported. NICs are explicitly not armed for
wake in both the classic shutdown (S5) and hybrid shutdown (S4) cases because users expect zero power consumption and battery drain in the shutdown state. This behavior removes the possibility of spurious wakes when explicit shutdown was requested.
As a result, Wake-On-LAN is only ever supported from sleep (S3) or hibernate (S4).

Hybrid shutdown (S4) stops user sessions but the contents of kernel sessions are written to hard disk. This enables faster boot. "

But that is not true:

1. Update your driver from the vendor site

2. If you have the option to enable wake on link you can shut your pc down and wake it by WOL.

3. Standy and hibernation should work if you apply the settings of Jessen P.



Hope this helps you or someone else.

Kind regards,



isee2it.nl