Windows 10: 'Warning: Overlap: Directory' recorded in my CBS.LOG file

When I look inside CBS.LOG I find the warning messages below. They are not errors and running sfc /scannow comes up clean. I'm curious about these warning messages as they are always the same directories. I checked their permissions and nothing out of the ordinary pops out at me. It appears no harm is being done and other folks with overlay messages think that it's the fault of sfc itself not behaving properly. Any thoughts on this would be appreciated.

2019-07-27 16:43:51, Info CSI 000001cc Warning: Overlap: Directory \??\C:\Program Files (x86)\ is owned twice or has its security set twice
Original owner: Microsoft-Windows-shell32, version 10.0.18362.267, arch Host= amd64 Guest= x86, nonSxS, pkt {l:8 b:31bf3856ad364e35}
New owner: Microsoft-Windows-shell32, version 10.0.18362.267, arch Host= amd64 Guest= x86, nonSxS, pkt {l:8 b:31bf3856ad364e35}
2019-07-27 16:43:51, Info CSI 000001cd Warning: Overlap: Directory \??\C:\ProgramData\Microsoft\Windows\Start Menu\ is owned twice or has its security set twice
Original owner: Microsoft-Windows-shell32, version 10.0.18362.267, arch Host= amd64 Guest= x86, nonSxS, pkt {l:8 b:31bf3856ad364e35}
New owner: Microsoft-Windows-shell32, version 10.0.18362.267, arch Host= amd64 Guest= x86, nonSxS, pkt {l:8 b:31bf3856ad364e35}
2019-07-27 16:43:51, Info CSI 000001ce Warning: Overlap: Directory \??\C:\ProgramData\Microsoft\Windows\Start Menu\Programs\ is owned twice or has its security set twice
Original owner: Microsoft-Windows-shell32, version 10.0.18362.267, arch Host= amd64 Guest= x86, nonSxS, pkt {l:8 b:31bf3856ad364e35}
New owner: Microsoft-Windows-shell32, version 10.0.18362.267, arch Host= amd64 Guest= x86, nonSxS, pkt {l:8 b:31bf3856ad364e35}
2019-07-27 16:43:51, Info CSI 000001cf Warning: Overlap: Directory \??\C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\ is owned twice or has its security set twice
Original owner: Microsoft-Windows-shell32, version 10.0.18362.267, arch Host= amd64 Guest= x86, nonSxS, pkt {l:8 b:31bf3856ad364e35}
New owner: Microsoft-Windows-shell32, version 10.0.18362.267, arch Host= amd64 Guest= x86, nonSxS, pkt {l:8 b:31bf3856ad364e35}

:)

 

RealTimeLog.cvs Logs in Multiple Directories

Can you force the path setting for the RealTempLog.csv file?
Below are several scenarios of the RTL file starting or appending in two other directories than the RT directory.

The improvement: Force the RTS file to start in only one directory and append the file as the RT program starts/stops/starts, at Task Scheduling (startup or login), or any tests using the RT program.

My reason is I am using Excel PowerPivot and have set up pivot tables and charts that when ‘refreshed’ by PowerPivot, updates the tables and charts from the RTL file. Having the files start, stop, appends at various directories makes is a pain to ‘refresh’. There are ways to work around the problems, which maintains the link to a single file. Mainly; copying the file to the linked directory. However there is no continuous logging, which make me copy and paste from each log to the linked file. If all three RTL files are involved, it is a pain.

Anyhow, it would be very beneficial to force only one directory for logging the RTL file.

Below is some scenarios that represent the issue, as well as the RealTemp.ini information. Attached is more information in a zipped PDF file.

BTW, the program is awesome as it stands and thanks for the work you all have done to make it so.

Regards,
Dale

Dale Hamilton
L: dalehamilton@embarqmail.com

Here are the different scenarios regarding the directories, running ReatTemp (RT):
1. When starting RealTemp (RT) from the Task Scheduler at user login
a. RealTempLog.csv starts up in the Windows/SysWOW64 directory
b. Stopping RT, stops the log file in the Windows/SysWOW64 directory
c. Re-starting RT, starts a new RealTempLog.csv file in the RT directory
2. Stopping and starting RT after user login
a. Starts RealTempLog.csv file in the RT directory
b. Appends the log file with each start
3. Logging off while RT is still logging in the RT directory and then logging back on
a. RealTempLog starts logging in the Windows/SysWOW64 directory
b. The log file is appended at login time
c. The RealTempLog file in the RT directory stops logging at log-off time
4. Starting the XS Bench test
a. RTL continues to log in the directory that was logging at the time of starting XS Bench test
5. Starting the Sensor Test using Prime95 with the logging and log file at Windows/SysWOW64 directory
a. The RTL file closes in the Windows/SysWOW64 directory
b. The RTL file starts logging in the RT directory
c. The logging appends the RTL file
6. Starting the Sensor Test using Prime95 with the logging and log file at the RT directory
a. Closes the RTL file in the RT directory
b. Starts or appends the RTL file in the Prime95 directory
7. Starting the Sensor Test using Prime95 with the logging and log file at the Prime95 directory
a. Appends the RTL file at the Prime95 directory

RealTemp.ini Information:

[RealTemp]
;
;RealTemp 3.60
;September 30, 2010
;
;For further information and updates visit either of these sites:
;TechPowerUp
;Real Temp - New temp program for Intel Core processors
;
;Remove the semi-colon at the start of each line to try these options.
DegreeSymbolString=" ºC"
;
;How often the log file gets saved to the hard drive.
;Default is 60 seconds. Range is [1..86400] seconds.
HDWrite=1
;
;For Core 2 CPUs, use MSRMulti=1 to read the multiplier the traditional way.
;The default now is to use the same method that i7 Turbo uses for all processors.
;MSRMulti=1
;
;To read each CPU in a Skulltrail system use one of these.
;Skull=1
;Skull=2
;
;To use a calibratition formula similar to the original formula that has no affect
;on your reported temperatures between 70C and 100C use this. The original formula
;closely approximates what I found during testing.
;OldFormula=1
;
;Use the RealTemp Settings window to make all other adjustments.
;
WindowXY=562963771
IconTextColor0=0x80FFFF
IconTextColor1=0x80FF80
IconTextColor2=0xFFFF80
IconTextColor3=0xFF80FF
TjMax0=100
TjMax1=100
TjMax2=100
TjMax3=100
Idle0=0.0
Idle1=0.0
Idle2=3.0
Idle3=1.0
IconShow=0
LogFile=1
LogInterval=5
StartMinimized=0
TaskBar=1
FontNumber=
OnTop=0
TrayInfo=0
InfoWindow=
MiniMode=0
MinimizeOnClose=0
Spec=Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
RivaFile=C:\Program Files (x86)\RivaTuner v2.24 MSI Master Overclocking Arena 2009 edition\RivaTuner.exe
Alarm=0
Alarm1=100
Alarm2=100
CSV=1
AlarmFile=
VIDInfo=0
ClockMod=2
GUIColor=0xF4F3EE
GUIMiniColor=0xF4F3EE
GUIText=0x408000
GUIMiniText=0x000000
GUINormHead=0x000000
GUIMiniHead=0x000000
NormHeading=1
MiniHeading=0
TMLoad=0
CustomGUI=0
CustomGUIMini=0
CPUID=0x6FB
Quality=3
ThreeDigit=0
GPU=0
Fahrenheit=0
IconTextColor4=0x8080FF
AnchorXY=560407865
lfHeight=-16
lfWidth=0
lfWeight=400
lfItalic=0
lfCharSet=0
lfPitchAndFamily=18
lfFaceName=Times New Roman

 

Directory Size Utility

New! Directory Size Utility BETA v1.2


Change Log v1.2

• Resolved an issue were the "Delete file", "Sort by Size", and "Export file" buttons would run into the "About" button and cause the "Directory Size Utility" to crash.
• New right click menu("Get folder...", "Open folder") for folder list.
• New right click menu("Launch file", "Delete file") for file list.
• Aligned total folder size at the bottom to center the program.
• Double clicking the file in file list will now launch the file.

Download here!

 

Directory Size Utility

Change Log v1.6

• Resoved an issue where selecting "Detail" from the "View" drop down would cause duplicates.
• New "Peek" feature!
  • Selecting something in the Directory column in the Directory view (Left window) while holding "z" will peek into that directory!
  • Double clicking the Directory column in the directory view(Left window) while holding "z" will add the folder.
• New color coded feature in both Size columns for Detailed view.
• Exporting to Excel will now Export both Folder (left) and File (right) window. In the excel file the Folder, and File window will be on different sheets.
• Add a feature to export to older excel 97-2003 (.xls) from the file/export drop down window.

Download HERE!

Don't forget to enter to win this game bundle! here Drawing is this Friday!