Windows 10: WdFilter.sys error

Ok so after I got WdBoot.sys error, I did chkdsk and sfc /scannow. It seems to go away, but another Wd error appears again, WdFilter.sys now. It seems that windows defender is having problem but I don't know how that happens. I'm also assuming the whole wd driver is faulty. Any solution?

:)

 

BSOD while using the internet. error (L1C63x64.sys)


Hi trainman81,

Welcome to the 10forums.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

1. Uninstall Daemon Tools
2. Download the SPTD standalone installer and follow these steps:
   • Double click the executable to open it
   • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window


AVG is trying to request data from the internet, which is why the network driver is marked as the cause.
Code:

Code:

*** WARNING: Unable to verify timestamp for L1C63x64.sys *** ERROR: Module load completed but symbols could not be loaded for L1C63x64.sys 0: kd> lmvm L1C63x64 start             end                 module name fffff801`89700000 fffff801`89722000   L1C63x64 T (no symbols)                Loaded symbol image file: L1C63x64.sys     Image path: \SystemRoot\System32\drivers\L1C63x64.sys     Image name: L1C63x64.sys     Timestamp:        Mon Apr 01 05:15:17 2013 (5158FBC5)     CheckSum:         000245C4     ImageSize:        00022000     Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

AVG drivers that have been flagged
Code:

Code:

*** WARNING: Unable to verify timestamp for avgwfpa.sys *** ERROR: Module load completed but symbols could not be loaded for avgwfpa.sys *** WARNING: Unable to verify timestamp for avgfwd6a.sys *** ERROR: Module load completed but symbols could not be loaded for avgfwd6a.sys

Please uninstall AVG and see if it helps
Uninstall AVG | AVG
It is further recommended to check your Qualcomm network driver for updates, its driver is not supported for Windows 10.
Driver Reference Table - L1C63x64.sys

 

dxgmms2.sys error

Hi Ed,

The dxgmms2.sys error may arise due to faulty hardware, outdated drivers, and software conflicts. For us to properly determine what's causing this and provide you with the solution to rectify the concern, supply more information by
answering these questions:

• How and when did the issue start?
• May we know what exactly happens when you encounter this error?
  
• Have you recently installed any updates?
• Have you made any significant changes to your device prior to this happening?
• Are there any 3rd party applications or antivirus software installed on your computer?
• What troubleshooting steps have you done so far?

We will be waiting for your reply so we can move forward to resolving your issue.

 

Windows\system32\drivers\wdfilter. sys

A. Try to boot into safe mode

Power ON your computer and as Windows / manufacturer's Logo appears, Power OFF - Repeat 3 times

Now your computer will go into Advanced Recovery Environment

Advanced Options > Troubleshoot > Advanced Options > Startup Settings > Restart

Press 4 or F4 to enable Safe Mode (5 or F5 to enable Safe Mode with Networking)

Log in once Windows starts in safe mode

B. Another option when you are in Advanced Options in previous step is to choose (Note - You won't lose any files in this step)

1. System Restore - This will restore your system to a point when things were working fine.

OR

2. Startup Repair - Startup Repair upgrade fixes all Windows errors and retains all files, applications and settings.

C. Final option could be Reset this PC.

In Step A > Troubleshoot > Reset this PC - Keep my files and Remove everything. Choose this carefully as most likely you would like to keep your files.

All apps will be removed and windows will be reinstalled.