Windows 10: We are using a 24 port rack mounted switch in our office. Network speed showing humongous...

We are using a 24 port rack mounted switch in our office. Network speed showing humongous difference in different PC's. Some PC gives 100Mbps and Some gives 3-4 Mbps.Different computer tried on same port gives different speed. Any solution.?

:)

 

NETGEAR Expands Industry-First Portfolio of 5-Speed Networking Switches

NETGEAR, Inc., the leading provider of networking devices that power today's smart home and small to medium-sized businesses (SMBs), is expanding its family of industry-first 5-speed Multi-Gigabit switching products first introduced last quarter.

The new NETGEAR 5-Speed switches operate at 100Mbps, 1Gbps, 2.5Gbps, 5Gbps, or 10Gbps. Through an intuitive interface, the Multi-Gigabit switches provide easy, reliable and affordable connectivity with granular per-port bandwidth control and traffic monitoring without needing to install expensive new cabling to alleviate speed barriers. The five speeds per Ethernet port make them the most flexible and affordable 10-Gigabit/Multi-Gigabit switches in the market.

• XS512EM 12-Port XS512EM 12-Port 10-Gigabit/Multi-Gigabit Ethernet Smart Managed Plus Switch with 2 SFP+ Ports, Desktop and Rackmount- $899.99
• XS724EM 24-Port XS724EM 24-Port 10-Gigabit/Multi-Gigabit Ethernet Smart Managed Plus Switch with 2 SFP+ Ports, Rackmount- $1,699.99

Editor's Note: Photographs taken by the TPU team at the event.
Modern high-performance networking devices such as network cards, gaming PCs, desktop PCs, servers, NAS storage and AC Wave 2 Wireless Access Points now offer both 2.5-Gigabit or 5-Gigabit connectivity. Other 10-Gigabit switches provide a standard 1-Gigabit connectivity to any device requiring less than 10 Gbps, but NETGEAR Multi-Gigabit Switches provide additional options for 2.5 and 5 Gbps. So, businesses are able to combine legacy Ethernet speeds like 100 Mbps or 1Gbps, with 10Gbps and now 2.5 and 5Gbps, so that all of the devices in your business, small office or home can run at their individual highest speeds. NETGEAR has designed these switches to be plug-and-play, making them capable of easily leveraging the full potential of performance and coverage offered by the latest high-speed devices.

Each of the intelligent multi-speed copper Ethernet ports on the switches automatically detects the speed requested by the connected device and the quality of the cabling, and provides the appropriate connection at one of the five speeds. The ports can be connected with regular Cat5E Ethernet cables, without the need to upgrade to Cat6 wiring, thereby reducing wiring costs and hassle. Each switch also has two SFP+ fiber ports with 1-Gigabit or 10-Gigabit connectivity that's ideal for providing a high-speed uplink to your core network.

Both the XS512EM and the XS724EM Switches go beyond basic network connectivity by adding REVS (Reliability, Enhanced Control, Visibility and Security) values to any SMB network

• Reliability - Link Aggregation and Loop Prevention assure that the SMB networks are up and running to minimize possible downtimes.
• Enhanced Control - Improves your network performance with VLAN, QoS and Multicast Support.
• Visibility - Identifies any possible cable issues or abnormal traffic behavior with cable health test and port statistics.
• Security - Protects SMB networks for possible threats through Auto DoS and Storm Control.

Both the new XS724EM and the XS512EM Switches can operate either in silent mode or with a quiet fan. This whisper-quiet feature, combined with the smaller form factor of the 12-port XS512EM and its flexible, rackmount and desktop mounting options, makes the XS512EM especially ideal for smaller spaces.

Richard Jonker, vice president of product line management for SMB products at NETGEAR, said, "New devices on your network today each operate at their own speed for optimum performance. With NETGEAR, your newest devices are able to reach their top performance because our new 5-Speed Switches automatically sense and adjust to the appropriate speed on a per port basis, over existing cabling. They make it easy on your IT budget, too."

The new Multi-Gigabit Smart Managed Plus Switches deliver the full set of powerful features of other NETGEAR Smart Managed Plus Switches - including network monitoring, traffic prioritization, and network segmentation - to small businesses who want more visibility and control on top of plug-and-play connectivity. Easy-to-use web browser-based management GUI makes advanced setup simple. Features include:

• QoS, VLAN and network monitoring
• Auto "denial-of-service" (DoS) prevention
• Cable test, loop prevention and broadcast storm controls
• IGMP snooping v1, v2 and v3 support for multicast optimization
• Rate limiting and priority queuing for better bandwidth allocation
• Port mirroring for network monitoring
• Link Aggregation (static, LACP) to add redundancy and increase speed in your connections
• Energy efficient Ethernet (IEEE 802.3az) for maximum power savings

Availability
NETGEAR XS512EM 12-Port and XS724EM 24-Port 10-Gigabit/Multi-Gigabit Ethernet Smart Managed Plus Switches are available now worldwide through authorized NETGEAR partners and other reseller channels and ecommerce sites. Regional variance may apply to the final pricing for end customers depending on the reseller and bundled offerings.

The 5-Speed Multi-Gigabit Switching Product Family
In addition to the XS512EM and XS5724EM Switches, there are already several other switches in the uniquely comprehensive NETGEAR portfolio of Multi-Gigabit/5-Speed Switches Customers can find a solution to fit every need and price point in both copper and fiber options, and desktop and rackmount editions of Unmanaged, Smart Managed Plus, Smart Managed Pro, and Fully Managed Switches.

• XS505M 5-Port 10-Gigabit/Multi-Gigabit Ethernet Unmanaged Switch with SFP+ Port - $399.99
• XS508M 8-Port 10-Gigabit/Multi-Gigabit Ethernet Unmanaged Switch with SFP+ Port - $599.99
• GS110MX 8-Port Gigabit Ethernet Unmanaged Switch with 2-Port 10G/Multi-Gig Uplinks (GS110MX) - $199.99
• GS110EMX 8-Port Gigabit Ethernet Smart Managed Plus Switch with 2-Port 10G/Multi-Gig Uplinks - $249.99
• MS510TX 8-Port Multi-Gigabit Ethernet Smart Managed Pro Switch with 10G Copper and SFP+ Ports - $349.99
• MS510TXPP 8-Port PoE+ Multi-Gigabit Ethernet Smart Managed Pro Switch with 10G Copper and SFP+ Ports - $449.99
• M4200 Fully Managed Intelligent Edge Series Multi-Gigabit Ethernet Switch with PoE+ and 2 SFP+ Ports - $1,149.99

All NETGEAR Multi-Gigabit Ethernet Switches are supported by the industry-leading ProSAFE Lifetime Hardware Warranty including Lifetime Next Business Day shipping for part replacement and Lifetime Technical Support options.

 

Networking help for my new office

I am moving my business into a new office over the weekend. There is space for around 20 workstations (I haven't counted exactly yet but its around that figure and I'm at home now so cant check exactly) There are neat desk level wall sockets and an Ethernet/ Telephone plug socket for each desk space running around the walls in conduit.

The Ethernet cabling for all the Ethernet ports in the office run back into the server room next door to the office and to the back of the server rack and at least half of the cables still have their Ethernet plugs on still (some are just cut off and I will need to add plugs). All the cabling appears to be numbered and so are the ports in the wall which should help somewhat!

Basically what I want to do is buy a large gigabit switch to put in the existing server rack and plug the Ethernet cables into it so that the Ethernet ports running along the walls of the office all work.

The internet and phone lines are getting activated on the 30th Dec and I will have an ADSL2 modem which I will plug into the switch to give internet access to all these ports.

I have no idea if the existing network cabling is cat5, cat6 POE etc and dont know the difference so my questions are:

• How do I know what type of Ethernet is wired in there already?
• What type of Ethernet (Cat 5/6 etc) do I need for normal networking of standard PC's like you would at home to a regular home router?
• If the Ethernet is setup in a certain way (Cat5,Cat6 etc) and I need the other type, would I just be able to crimp new plugs onto the ends of the wires to make it work or would I have to recable new wires it all as there would be missing internal wires?
• What tools will I need to do this? I am assuming a network tester, crimping tool and spare Ethernet plugs

I'm going back in on Monday to make sense of this mess and will try to take pictures to show the setup in more detail.

I am very competent in computer building, but my knowledge of networking doesn't stretch further than setting up a basic home network on a broadband modem/router and I've never tried crimping network cables before.

 

Network speed test not showing history or upload speed Windows 10

I just downloaded Network Speed Test from the MS Store but it shows only the download speed. It doesn't show the upload speed nor the history. Any suggestions, anyone?