Windows 10: We couldn't find any drives. To get a storage driver, click Load driver.

I am installing windows 10 on my computer F2A68HM-S1 GIGABYTE and AMD-A67480 RADEON R5 processor, the bios mode is "UEFI", I am using USB STICK fat 32. I tried switching bios to "LEGACY ONLY" and formatting USB STICK to MBR, then when I go back to "UEFI" there are 3 options that appear and I should do one of that to remove that message. I switch USB and now I am using "exfat" and the bios is "LEGACY ONLY" but I can't proceed to partition because my HDD would not appear. Please help me.

:)

 

Error....We can not find any drives. To get storage driver click load driver."

I am getting this error while installing windows 10 from usb drive. I m on this menu where it asks - where do you want to install windows?.....Error....We can not find any drives. To get storage driver click load driver."

 

Reverting a VertIO driver installation on boot drive

I fixed my issue by attempting to load the drive bare metal and when Windows got to the repair stage I took these steps:

1. Select troubleshoot.
   
2. Advanced Options.
   
3. Startup Settings.
   
4. Options 6 "Disable Driver signature enforcement".
   

(Though I don't think the following steps were needed) When the system restarted I was able to login and all I had to do then was open CMD via (Windows key + R) and type CMD click ok and enter the following commands:

1. "bcdedit /deletevalue {current} safeboot".
   
2. "shutdown /r /t 0".
   

And it was running like normal.

 

Windows 10 external hard drive driver

Hi,

I suggest you to update the drivers for this device and check if it helps.

To do this, follow these steps:

• In Device Manager, right click the USB Attached SCSI (UAS) MASS Storage
  Device.
• Click Update Driver.
• Follow the instructions to update the driver.

Note: You may be prompted to provide the path of the driver. Windows may have the driver built-in, or the driver files may still be installed from the last time that you set up the device.

If the issue persists, you may uninstall and reinstall the drivers and check if it helps.

• 
  Press Windows+X keys and select Device Manager.
  
• 
  Right click on USB Attached SCSI (UAS) MASS Storage
  and select Uninstall.
  
• 
  Restart the computer and let the computer install the driver.
  

You may also try installing the latest chipset drivers from the manufacturer's website and check.

Please update us with the status. We will be glad to assist you.