Windows 10: Weird blue and black lined screen when booting new pc from usb

So I just built a new pc, booted it up, got through to bios, and everything worked through there, everything was there and running at the right frequency/size. However, when I tried to boot win10 from a usb, I got this weird screen which lingers for 2 minutes and then everything turns off.

Do I just need to recreate the media for the usb on a different pc again or is there a bigger problem?

Thanks in advance

submitted by /u/snazzypenguin12
[link] [comments]

:)

 

USB ports fail, then blue screen of death on three Windows 10 computers -- Can this be fixed or is this caused by a virus?

Hi Grace,

It's possible that certain drivers, such as USB and other device drivers are causing blue screen errors on your PC. Another factor is due to a conflicting third-party software. Now, before we get into the solution, were you able to boot your computer normally
or can it boot to the desktop screen? If yes, then we suggest that you run the
Hardware diagnostic tool on your PC. Just type troubleshooter on the
Search box, press Enter, then look for
Hardware and Devices, and click Run the troubleshooter.

If the troubleshooter didn't resolve the port issue, then might as well you update the USB driver, and the BIOS firmware of your computer.

In addition to that, if you're still getting a blue/black screen error after performing the recommended steps, then we suggest that refer to the troubleshooting steps from these articles:

• Troubleshoot blue screen errors.
• Troubleshoot black screen or blank screen errors.

Let us know the outcome.

 

Weird screen lines after black screen transition problem


Hello everyone,

Sometime ago i made a thread on this forum about my monitor sometimes showing ''no signal'' after cold pc boot. (monitor on first, then booting pc, no signal, hard reset pc and it worked). I got around this by first booting up my screen, wait for the logo of AOC to dissappear and then boot up pc.

Now i have a really weird problem and i just cant figure it out, after looking on google the last couple of weeks im desperate to find the solution.

My pc works fine, nothing weird going on and it works how it should be for being a budget pc. But i still have the following problem: Whenever im booting up a game, or updating my graphics card or w/e. My screen sometimes (lets say once a day when using the pc for like 4 hours or something) gets all fuzzy/blurry. Better said, every single line of pixels from left to right on my screen are out of place. I made a picture of it but you cant nsee it on that picture. only on the left and the right of the screen are small white lines. the rest of the screen its just like all out of place. 1 total horizontal line moved 1 pixel to the left, line beneath moved like to the right etc. Its little bit hard to explain (and hard to google..)

This only happens when my pc has to transition to a black screen and back to a game or something. Lets say i boot up a game, it goes black for a second and then into the loading screen. Then it pops over to the fuzzy/blurry lines thing. This also happened when i updated my geforce graphics card. right between it goes to black (to install new drivers) and goes back to the screen it happens. Only on those occasions. On black screen transitions.

Well yeah i could just try to turn of my monitor and turn it back on. But when i do that my screen cant find any signal anymore. What is weird tho that when it has no signal it goes dark and the light stays orange. When this happens it keeps going green to orange the whole time saying no signal everytime. I can only fix this by rebooting my pc with the power button. After that, no problemo

My spec:
CPU: G4560
RAM: 2x Hyperx Ram
GPU: GTX 1050 Ti Gaming X 4G
MOBO: MSI B250 PC Mate
MONITOR: AOC G2460V

Things i did:
-DDU uninstall drivers and reinstall (with rebooting in between)
-Power cord from monitor out of power supply and back in after few hours (read it somewhere on the internet with bad electricity
- Uninstalled screen software (can switch settings with that)

Things worth noting:
- Connected with Displayport
- PS4 connected with HDMI does also not show no signal if i turn ps4 on first and screen second.
- The menu where i can change screen settings it not out of place
- When i turn ps4 on when this happens the screen of that is fine
- IT NEVER happens during normal use, only on transitioning to black screen and back
- I sometimes hear the ''disconnected'' sound windows provides when you like take out a USB stick or something.

Thing i will do coming days:
- Power hub where i connected everything to has a failsafe in it (sometimes i hear it ticking) perhaps its giving
faulty electricity?

Sorry for my bad english btw, its not great, i really hope someone knows something, if not im going to send my monitor first to check (because of ps4 also having trouble sometimes staying black screen)

 

USB ports fail, then blue screen of death on three Windows 10 computers -- Can this be fixed or is this caused by a virus?

Marque:

"were you to able to your computer normally or can it boot to the desktop screen?" No. All that displays upon (re)booting are blue screen messages. Because of this, we cannot perform the tasks you listed such as troubleshooting
blue screen errors. No error number appears. I do have several jpg's of the various blue screens that display (I described them in my first message). Let me know if it would be helpful for me to attach one or more. Thanks.