Windows 10: Weird boot issue involving drivers BSOD

Hello, yesterday I was casually using my computer and had to restart for one of the apps to update. With the restart, I realized something was wrong. The computer was stuck on the restarting screen before reboot and would not go. I had to forcefully shut it down as it just would not do a proper restart. After hours, I managed to get some errors in order to report it here, and the blue screen error was DRIVER_POWER_STATE_FAILURE, which is caused by drivers. I also got another blue screen error WHEA_UNCORRECTABLE_ERROR, however my computer has no hardware related issues, only drivers as I know

:)

 

BSOD- atikmpag.sys

This is most likely due to an installation/upgrade error with ATI driver's. I suggest doing DriveSweeper and the following:

• Drivesweeper all drivers & in Safe Mode
• Unistall all drivers that aren't used in DriveSweeper (CCC Profiler Updates, MSI AfterBurner, anything related to ATI that use's it's drivers.)
• After you do this, the first thing you need to do is go into Device Manager and Unistall your ATI Drivers

Once your done, restart the PC and then try installing the latest drivers.


I had several issues with this in the past, but I overcame it with logical reasoning and whenever I have a driver issue, I just use these steps and I always overcome the problem.

Best of luck! *Toast :toast:

 

Weird BSOD problem


Hi Everyone,

I have a weird BSOD problem which I cannot solve for a while(it persists still after upgrade to Windows 10 from Windows 7)

The main strange thing about this is that I get BSOD only after cold boot.
So it acts like this:

1. start PC.
2. Get to Windows Logo Screen
3. BSOD
4. Restart
5. Get to menu where I can try to repair or Start NormallyIf I Choose Repair, it will fail to repair and will try to restoreIf I Choose Start Normally, it will start OK, no BSOD, can work normally, games, browse internet, everything is normal.6. Shutdown PC
7. Next time when I start is all over again i.e. Go to Step 1

I have this problem for a while, so what I tried:

1. Another Windows 7
2. Another HDD
3. Only HDD connected
4. Changed RAM
5. Tried with built in GPU
6. Upgraded to Windows 10

Result is the same as above every time.

Please suggest what could be the cause.
Logs collected with DM_Log_Collector, attached.


Thank you

PS. This thread is a continuation of this one: Frequent multiple errors BSOD. Solved - Windows 7 Help Forums the only thing changed is Windows 10 now. instead of Windows 7. If that helps somehow.

 

BSOD DRIVER_POWER_STATE_FAILURE randomly after cold boot/sleep

For the past month I have been getting random BSOD's all with driver power state failure. They happen randomly, usually within the first 5-10 minutes of cold booting or waking my computer. Steps I have taken to attempt to fix the problem:

1. Reinstalled GPU drivers/ tried old drivers
2. Fresh installed Windows 1803, still happened, then fresh installed 1709
3. Disabled Fast Boot

None of these things fixed the issue, any help would be much appreciated at pinpointing the issue. Thanks