Windows 10: What causes this problem in Windows 11 and is there a fix?

When i try to open my computer after a install of a fresh copy of Windows 11 it boots normally but then it says Just a moment for 10 seconds and then the computer completely shuts down when i try to open it the same thing happens over and over againBy the way i had no issues like this on Windows 10And i didnt upgrade it from the settings i Just grabbed a USB drive and installed from that using rufusAnd i tried changing boot options i did uefi i did legacy both of them not workI tried booting from USB drive and it didnt work obviouslyAnd the same happened when i tried the hard drive

:)

 

Nvidia driver problem with 940 MX on Windows 10 x64

I would only go back to the driver from the computers manufacturers if you experience any issues with the latest drivers from devie manufacturers.

If everything is still working well with the clean boot then you can start troubleshooting as follows to start:

How to determine what is causing the problem after you do a clean boot


1. Log on to the computer by using an account that has administrator rights.
2. From Start, search for msconfig. (In Windows 10, use the Search box from the Start menu. In Windows 8 or 8.1, swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click Search.)
3. Select msconfig or System Configuration from the search results.
4. Tap or click the Services tab, and then tap or click to select the Hide all Microsoft services check box.
5. Tap or click to select the upper half of the check boxes in the Service list.
6. Tap or click OK, and then tap or click Restart.
7. After the computer finishes restarting, determine whether the problem still occurs.
• If the problem still occurs, repeat steps 1 through 6, but clear the lower half of the check boxes in the Service list that you originally selected.
• If the problem does not occur, repeat steps 1 through 6, and select only the upper half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.
• If you still experience the problem when only one service is selected in the Service list, this means that the selected service causes the problem, and you should go to step 11. If no service causes the problem, go to step 8.
8. Repeat steps 1 and 3 in this section.
9. Tap or click the Startup tab, and then tap or click to select the upper half of the check boxes in the Startup Item list.
10. Click OK, and then click Restart.
• If the problem still occurs, repeat steps 8 and 9, but clear the lower half of the checked boxes in the Startup Item list that you originally selected.
• If the problem does not occur, repeat steps 8 and 9, and select only the upper half of the remaining check boxes that are cleared in the Startup Item list. Repeat these steps until you have selected all the check boxes.
• If you still experience the problem after only one Startup Item is selected in the Startup Item list, this means that the selected Startup Item causes the problem, and you should go to step 11. If no Startup Item causes this problem, a Microsoft service probably causes the problem. To determine which Microsoft service may be causing the problem, repeat steps 1 through 7 without selecting the Hide all Microsoft services check box in each step.
11. After you determine the startup item or the service that causes the problem, contact the program manufacturer to determine whether the problem can be resolved. Or, run the System Configuration utility, and then tap or click to clear the check box for the problem item.
From <How to perform a clean boot in Windows - Microsoft Support>

 

Windows error 8024402F Fix?

You can fix this problem easily please follow the steps which is using in this video "youtu.be/TXW64QDpGoI"

 

Windows 10 update cause printer problem with: "Printer not activated - Error - 20"

Hi John,

Thank you for posting in Microsoft Community, we appreciate your interest in Windows 10.

I understand your concern about accessing the printer after the Windows Update, we will help you with this issue.

Do let us know the following:

• What is the make and model of your device?
• How is the printer connected to the computer, locally or through network?
• Have you tried any troubleshooting steps to resolve this issue?

I suggest you to try the below and check if it helps.

Step 1: I suggest you to update the drivers for printer and check.

• 
  Right click on the Start button from the desktop and select
  Device Manager.
  
• 
  Locate and expand Print queue.
  
• 
  Right-click on the printer driver
  that is listed and click Update driver software.
  

Step 2: I suggest you to run the printer troubleshooter from
“Fix printer problems”
and then check if this fixes the issue.

Hope it helps. Reply to the post with an updated status of this issue and required information, we will be happy to help you further.