Windows 10: What drive do I choose to restore with Macrium

Booted the new PC with USB drive with the Macrium Reflect boot menu. The new PC has 2 drives. A 500GB SSD and a 2TB HDD. The same as the old one. Both of them are on the Macrium image as 1 and 2. I plugged in the EXTERNAL HDD and it came up as C:\. It asked me to choose a source from the image files, and I chose 1 - SSD (C. It asked me to choose a destination, and the only one available is Local disk. Disk 2 [00000000] - Samsung SSD 970 EVO 500GB 2B2QEXE7 <465.76 GB>

Is it going in to the new SSD?

Thanks for the help.

TRS

:)

 

Restoring Windows 10 Image using Macrium Reflect


In addition to the above. Here's my suggestion in step by step.
I assume you have Macrium Installed in your current HD and already made a backup copy.

1. Connect your new HD via USB port and boot up.
2. Run Macrium, click on Restore tab then select the Backup Image that you made to restore
3. click on "select a different target disk" then select your new HD as destination
   
   
   
4. Proceed to restore then Shutdown and disconnect the old HD and replace with the new HD
5. Boot up with your new HD.

 

W10 macrium mirror to be restored on a smaller drive

1. I assume that you've already created a Rescue Disk. Boot up with it.
2. Click on restore tab and browse for the backup image on the external HD.
3. Select your current Windows drive as destiunation drive.
4. Click on each partition of the destination drive, then click "Delete Existing Partition" until empty as shown:
   
   
   
5. Next click on first partition (400MB) drag and drop to the destination, do the same for 300MB.
   NOTE: You might have an extra MSR partition which was not shown with disk management. If so, do the same as for 400MB and 300MB.
6. Now, drag and drop C drive from source then click on "Restored Partition Properties" as shown. Enter New partiiton size. In your case, would be 150GB.
   
   
   
7. Drag and drop next partition and repeat step 6, enter 150GB.
8. Drag and Drop the last partition then click on Maximum size so it would take the rest.
   Final layout should look like this: 400MB, 300MB, 150GB Cdrive, 150GB, ~130G
9. Click OK ->Next->Finish
10. Once done, just to make sure it will boot. Click on "Fix Windows Boot Problems" and follow the screen.
11. Reboot.

NOTE: The screens above are from my disk and shown as an example.

 

Free hard drive backup/restore program?

I am looking for a free (freeware) program that will back up and restore a hard drive. I'm looking to clone a few external hard drives. If the program will backup the used space instead of the whole drive this will be awesome! Thanks for any suggestions.