Windows 10: What happens if I reset my computer after I moved the OS via cable to SSD

A while back I transferred my OS from my HDD to a SSD. Now I'm planning to sell the laptop, but I want to reset it first and take out the SSD and transfer the OS to the HDD. so I can put the SSD in my new laptop and transfer the OS to it , so what I would really appreciate if you can tell me what I might expect to pop up in the BIOS after I rest it and how to reverse the HDD back to being the OS

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Is it possible to move the OS from SSD to HDD ?

hi

i'm thinking of adding an ssd to my computer but i don't want to format the OS since it's tiring to re-add my emails and other stuff, so i wanted to know is it possible to move the OS from SSD to HDD without reinstalling the window?

 

Move OS to SSD leave data in HDD

To do so, follow the steps below:

Step 1.
Clone OS to SSD.

Step 2. Enter into BIOS and set the SSD as the first boot disk.

Step 3. Change the old drive to D:\ (you'd better do a disk backup of the old drive in adavance).

Hope my answer will give you a hand.