Windows 10: What is happening to my pc????

Hi, for a while now things have been getting worse and worse. Ill start by listing few example of things that have happened.-task manager not working-applications beginning to not launch without a restart-task bar disappearing/freezing-settings no loading-both monitors go white then refresh-when sitting idle for to long certin application will not work-when restarting will sit on restarting screen indefinitely-wont shut down without forceshutdown-wont let me launch windows defender for a short while-sometimes on boot will continuously turn off and on untill either unplugged or off switch on po

:)

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

Edge Search Does Not Permit Change of Region


I got these suggestions from the Microsoft Community forum.No. 1 worked for me:

Thank you for posting the query on Microsoft Community. I am glad to assist you on this.
We have reproduce the issue here and we are able to access non-regional search for google using Microsoft Edge.
I would suggest you to try the below steps and check if it helps.
Step 1:
Clear browsing data option of Microsoft Edge and check if you face the issue. To do so perform the steps below.

1. Click on the More actions icon next to the feedback icon present on top right corner of the Project Spartan homepage.
2. Select Settings and click on Choose what to clear.
3. Check the boxes Browsing history, Cookies and saved website data and Cached data and files and click on Clear.

Step 2:
I suggest you to create a new user account and check if the issue occurs.

1. Go to Settings.
2. Choose Accounts and then select Family and other users.
3. Select add someone else on this PC.
4. Enter a user name and hit next.
5. Click on Finish.
6. Sign out from the current Account and Log into the new account.

Step 3:
It could also happen because of network issue. I suggest you to try with different network connection and check if it helps.

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".