Windows 10: What is the fix for these 2 errors?

Log Name: ApplicationSource: Application ErrorDate: 1/29/2025 4:34:26 PMEvent ID: 1000Task Category: Application Crashing EventsLevel: ErrorKeywords: User: CHARLIEPC\cmleeComputer: CharliePCDescription:Faulting application name: Launcher.exe_Borderlands 2 launcher, version: 1.0.0.0, time stamp: 0x62e42f6eFaulting module name: KERNELBASE.dll, version: 10.0.22621.4830, time stamp: 0x2a1800c3Exception code: 0xe0434352Fault offset: 0x0014d4f2Faulting process id: 0x0x528Faulting application start time: 0x0x1DB72AEB749CCCEFaulting application path

:)

 

2 x SSD Raid 0 - is this right?

T ski b4 your done with this post can you list a step by step fix of what you did, I would appreciate it if you would...Thanks

 

Reserved Partition Error - Fix Doesn't Work

here are the pics. did not pirate windows 10. under programs, nero is not listed. are we getting near a solution? maybe i should just do a clean install. this is getting out of hand. didn't think it would take 50 steps. also, this drive is from my other computer. maybe there is a compatibility error?

 

ATIFlash 'ERROR 0FL01' FIX

If you have been suffering messages such as 'Adapter not Found' and 'ERROR 0FL01' or even 'Invalid Adapter or BIOS Selected' when trying to flash or reflash your Video cards Bios and you are lucky enough to own a PC capable of running more than one PCI-E Video card then this could just be the Guide you've been looking for.

--------------
Required Files
--------------
*HP USB Disk Storage Format Tool
http://h20000.www2.hp.com/bizsuppor...swItem=MTX-UNITY-I23839&jumpid=reg_R1002_USEN
--------------
*USB Boot Files
http://www.4shared.com/file/43544416/39060a9e/HPUSBFW_BOOTFILES.html?s=1
--------------
*ATIFlash
http://www.techpowerup.com/downloads/1731/ATIFlash 3.79.html
--------------
*Your Video Cards Bios
http://www.techpowerup.com/vgabios/...re=&manufacturer=&model=&interface=&memSize=0

------
Part 1
------
Step 1 Create USB Boot Drive with HP USB Disk Storage Format Tool

Step 2 Copy all the USB Boot files to the USB Boot Drive (do not overwrite files when prompted)

Step 3 Copy ATIFlash files USB Boot Drive

Step 4 Copy new BIOS file to USB BOOT Drive (name it something like bios.bin as you will be using this name in a DOS Prompt later on)
------
Part 2
------
Step 1 Boot into 'Safe Mode' (by pressing f8 before booting into Windows)

Step 2 Uninstall ATI Drivers and Associated Software then Reboot
\
Step 3 Go to Device Manager 'Display Adapters' and Uninstall (including Software when prompted)

Step 4 SHUT DOWN your PC (DO NOT REBOOT, if you should so happen to Reboot repeat Step 3 above)
------
Part 3
------
Step 1 Remove your Video Card from the top PCI-E slot and place it in a different PCI-E slot (this is the step that sets this Guide apart from all the others)

Step 2 Reboot into your Mobo's Bios

Step 3 Once in your Mobo's Bios change the first Boot Device to USB-HDD (or your Equivalent setting) then Reboot

Step 4 At the C:\ Prompt type, atiflash -ai 0 ,this will provide you with proof that your Video Card does infact exist

Step 5 At the C:\ Prompt type, atiflash -unlockrom 0 , i suggest you do this because some Bios files are infact locked and can't be flashed until unlocked

Step 6 At the C:\ Prompt type, atiflash -f -p 0 bios.rom , this is when your Bios is actually flashed

Step 7 Once your Bios has been flashed simply 'Ctrl+Alt+Delete' to restart your PC

Step 8 Go straight back into your Mobo's Bios and change your first Boot Device back to what it was (probably HDD) then Reboot for the final time and your finished
------