Windows 10: What size and number of monitors will my surface drive

I have a surface w/docking station with 2 x 24" monitors, running 1080 x 1920. What I need is four such monitors, or two monitors that are much wider.I'd like to run 2 x 47" monitors at 4K. One above the other. Is this feasible? Or which Surface and accessories do I need to upgrade to?Surface IntelR CoreTM i7-7660U CPU @ 2.50GHz 2.50 GHzProduct: 00330-62909-74916-AAOEM8 GB RAMWindows 10 ProThanksRob

:)

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?

 

Surface Laptop 3 with external monitor

Hi All,

Has anyone come across an issue with an external monitor blacking out while connected to a Surface Laptop 3? I have the laptop connected to a widescreen laptop with the Surface Dock. Both work fine however, once every hour or so the external monitor blacks out and comes back.

I've completed the following:

• Updated laptop drivers and firmware
  • Updated monitor drivers
  • Swapped out monitor

[/LIST]

 

Assign monitor Numbers

Hi,

If you're pertaining to making Acer screen as the monitor 1 and the other is 2, you can just have them interchanged by going following the steps below:

• Right-click on your desktop screen > Display settings.
• Under "Select and rearrange displays", just drag the monitor basing on your choice of number; then, click on "Apply" button after.

If the above given information is not what you're pertaining to, let us know so we would know the next action we can give you.

Update us after doing the steps.