Windows 10: what’s wrong with my pc?

everytime i turn my pc on now it will let me log in and sit on my home page for a bit than crashes and brings me to bios, what do you think is wrong?

:)

 

my pc location is showing the wrong location

I have the same issue. it lists our location at our old house we left 3 months ago.

it's fine using our phones (which have internal GPS), but all our PC's are showing the wrong location.

we have 1 on windows 10 and 1 on windows 11, both are wrong.

they are wrong in edge and chrome.

they are wrong in the weather apps and anything which uses the location.

I have followed the common steps of setting the location, of refreshing dns, or ip, I've changed all entries to location I can find.

even on websites to try to find a local branch, it suggests them near our old house.

Have just spent an hour on the phone with our ISP (EE) who have nothing more to suggest!

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

wrong bios programmed on my card what now?

are you kidding? or is this being lost in language barriers?(if so, then id suggest trying google translateon the list above, or reading it several times, im sorry that i cant help with that part) the PCIe slot is what you need, thats where you plug the GPU into. follow the step by step guide, that is your solution. VGA= Video Graphics array, or adapter in this case, AKA GPU, Aka, Video Card.

The 2nd gpu acts as a way to boot into OS since you're not able to do so with the damaged GPU. I don't know what your system specs are but if you have onboard graphics enable them in your bios and then reset your PC or do it after a reset depending on what your motherboard requires that will allow you to boot into your operating system then follow the steps after number three in the list above.( note that if you do not have built-in graphics on your CPU this is where you will use a second GPU )

i hope this helps......Best of luck, i have 35minutes to get dressed, and be on a transport to Kessel.......another day covered in Spice, *Frown (atleast im working in the Refinery *Wink )