Windows 10: When I click add Bluetooth device the little menu doesn't pop up to find devices. Why is this?

Kept on trying to connect my device but the actual menu that finds and you select a device won't pop up, I just see that loading circle around the mouse but the actual menu doesn't pop up which is pretty frustrating.

:)

 

Cannot use bluetooth device

1 Pairing is done in Settings, Devices
1.1 You click on Add Bluetooth or other device
1.2 You choose Bluetooth
1.3 If there is a pairing button on the bluetooth device itself then you press that now. You need to check the instructions for your bluetooth device to see how to do this - several automatically go into pairing mode when they switch on, others have a button that needs to be pressed for, say, 5 seconds.
1.4 The computer detects all available bluetooth devices and you select yours from the list. If yours is not on the list then Windows could not detect it.
1.5 It connects - pairing includes connecting
1.6 The computer sounds a buzz in the earpiece then displays Your device is ready to go and you click on Done
1.7 The device is shown in the devices list below the subheading Audio and it shows it as connected
1.8 The device should also appear in Control panel, Sounds, Playback tab
1.9 The device should also appear in Control panel, Devices & printers
1.10 {I just paired some bluetooth earphones as I typed so I could make sure these notes were correct} You use a music player and the sound comes out of the bluetooth earphones

2 If this is not happening for you then go to Contol panel, Devices & printers
2.1 Right-click on the device & select Remove device
2.2 You can now try pairing from scratch again
2.3 Several other users have reported that only removing the device with Bluetooth command line tools - BluetoothInstaller allowed them to re-pair again [see xzion's guidance below]
2.4 Yet others reported that only the KeithM code or Bungee's guidance worked for them [see below]

3 Where is this all going wrong for you?
[I assume we are definitely talking about bluetooth headphones/earphones. I understand that WiFi ones do also exist.]


4 Additional guidance -

Unpair a Bluetooth Device - TenForumsTutorials
Connect a Bluetooth device in Windows - Windows Help

Steps to completely remove a belutooth device so pairing can be done again [post #9, xzion] - TenForums
Steps to completely remove a belutooth device so pairing can be done again [post #22, KeithM] - TenForums
Steps to completely remove a belutooth device so pairing can be done again [post #39, Bungee] - TenForums
Several people registered in TenForums just to be able to thanks xzion, KeithM & Bungee. Apparently, what worked for some people did not work for others so each solution seems worth trying.


Denis

 

Cannot use bluetooth device

mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm

 

Device Manager Un-Hiding Hidden Devices

When you connect a plug and play device, Windows Plug and Play manager detects it, finds and installs the driver. Device Manager lists the device with a solid icon.

The driver is only removed when you uninstall the device, not simply by disconnecting the device. When the device is disconnected, its driver is still installed. By default, Device Manager only displays connected devices. When you show hidden devices, note the Bluetooth icon you see is semi-transparent (not opaque). That indicates a "non-present" device. Sometimes also called a "ghost" device. The driver is still installed but the device is not currently detected (i.e. not connected).

Device can be disconnected when

• Device unplugged (e.g. removing a USB device)
• Turning a device OFF
• Disabling the device in BIOS (then windows won't detect it) or
• Device failure

So

• Check BIOS as suggested
• Check board connections
• Can b/t be turned off by a switch? or keyboard combination?

Also possible the b/t h/w failed