Windows 10: When I open any application in my pc my system is hanging

My system is facing hanging issue.

:)

 

system hang when open GPU-Z with discrete graphics

On SugarBay/MahoBay platfrom,system will hang when open GPU-Z utility.
Below steps can duplicate this issue:

1.Boot to windows 7 with IGD, install newest intel chipset(9.3.0.1019 ) and IGD
driver(8.15.10.2598 ).
2.Boot to windows 7 again,can open GPU-Z normally.
3.Shutdown the system,connect discrete graphics replace IGD,install discrete graphics drvier and reboot.
4.Boot to windwos 7,can not open GPUZ utility and sometimes system will hang when open GPU-Z utility.
5.I have tried to remove the "Intel OpenCL(TM)1.1 support..." from the Control Panel \ Programs \ Programs and Feautures,it can open GPU-Z normally.

Can you fix this issue in GPU-Z?

 

Application Hangs (result in complete system hang)

So the strange thing is is that a week ago before a recent Windows Update these hangs started I had no issues whatsoever. I've had 14GB RAM (3x4GB + 1x2GB) for a year or two and I've never had any actual issues with my memory. Granted, some of my previous BSODs blamed memory management/memory corruption, but I've tested each RAM stick multiple times and all tests have passed with no issues. System integrity is sound, as per the results from sfc /scannow and check disk.

Screenshots below.











Note: I did perform these tasks in order as per zbook's response.

PoW32kWatchdog-20191012-0218.dmp: LiveKernelReports.zip - Google Drive

Driver Easy has been uninstalled.

SSD and External Drive F scanned with Chkdsk, reports nothing wrong. That being said, HD Tune does report my External Drive F with a temperature violation(?) and bad sectors. (But drive seems fine)














Event Viewer log: Event Viewer - Chkdsk log.zip

 

Windows fails to open applications

Hi,

Once I have several applications open Windows XP Professional Service Pack 2 refuses to open further application. I have heavy-weight applications like Delphi and Eclipse open, but the OS has coped with this in the past.

No error messages are reported by the application I am attempting to open, and there are no messages in the event viewer. What is really strange is that once the OS gets itself into this state, it appears that the OS can't allocate enough memory to perform simple API calls. If I go into an application that is already open and try to open the file menu, or right click on the taskbar to open the context menu, nothing happens.

If I close a few applications, then the problem goes away. The Task Manager performance tab indicates that I still have ~1Gb of physical memory available.

I think this could be caused by:

- A memory module is damaged. My memory is comprised of 1x1Gb modules. When the system attempts to allocate memory in the second module, it is unable to. I think this is a bit of a long-shot because I wouldn't expect my PC to boot if a memory module was playing-up

- I've installed something that has put something malicious on my PC. The only things I've installed recently are PRGrep and WinGrep, but unfortunately I didn't make a system restore point, and windows hasn't retained those old restore points. However a full Sophos scan doesn't show-up anything.

Any suggestions on how to diagnose/fix this welcome because I'm baffled as to what is going on.

Thanks,

Frank.