Windows 10: while tring to run the reset feature ,my power in went off and now everytime I try to do a...

while tring to run the reset feature ,my power in went off and now everytime I try to do a reset or tefresh it tells me to insert usb . The reset and refresh has worked great .I have used it several times . I did not do a recovery using usb or disc. Is there a comm prompt to force reset?

THanks

:)

 

probldems with power

Hi,

Your concern about your laptop turning off completely when placed on sleep mode may indicate a possible improper power plan configuration. As an initial step to rule out any power settings issues, we suggest that you reset the settings to default. To do
this, follow the steps below:

• Type cmd in the search box.
• Right clickCommand Prompt from the list, and select
  Run as administrator.
• Type or copy and paste the command below:
  
  powercfg -restoredefaultschemes
• Wait for the command to finish and restart the device if prompted.

Once you're done, check if the issue persists.

 

Desktop Turns On When Laptop Powered Up

Hi,

Welcome to Microsoft Community.

I suggest you for follow the methods below and check if it helps in solving the issue:

Method 1: Run Power Troubleshooter.

You may try to run the Power Troubleshooter and Reset the power options.

• 
  Type “Troubleshooting” in search box and press Enter.
  
• 
  Click on “View all” on the top left pane.
  
• 
  Select Power from the list and follow the prompts for troubleshooting.
  

Method 2:

Run the in-built Network troubleshooter by following the steps below.

• 
  Type “troubleshooting” in the search box and press Enter.
  
• 
  Click on “View all” on the top left corner.
  
• 
  Click on “Network Adapter” and follow the prompts for troubleshooting.
  

Then, shutdown your PC and check.

Let us know the status.

Regards,

Guru Kiran

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?