Windows 10: Why 1% drop on sdd in crystaldiskinfo after 4 days?

Why 1% drop on sdd in crystaldiskinfo after 4 days? should I be a concern?




:)

 

Not able to format 512GB Crucial MX100 (SDD#1)

October 2016

Hi everybody,
Like I say in the topic I can’t format my SSD#1 Crucial MX100 512GB.
Here what I try. Thanks.

Operating System: Windows 10 full updated (October 2016)
Computer: Asus Maximus Formula (buy at 2008)
BIOS: Legacy BIOS (mean no UEFI - Unified Extensible Firmware Interface)

BIOS and Windows 10 recognized the SDD#1.

----------------------------------------------------------------------------------
1- I try Disk Management to format the SDD#1.
One with “Quick format” option check and one with “Quick format” uncheck.

Same result for both:
The windows message received:
“Virtual Disk Manager” (title of the windows showing the message)
The format did not complete successfully (the message)
----------------------------------------------------------------------------------
2- For this step I just connect the SDD#1 and the CDROM
I try to boot from Windows 10 DVD installation, choose “Install” and Windows is not able to delete the partition on the SDD#1. It is not able to create a partition neither. And sure it’s not able to install Windows 10 on the SDD#1.
----------------------------------------------------------------------------------
3- For this step I just connect the SDD#1 and the CDROM
I try to boot from Windows 10 DVD installation, choose “Repair”, go in command prompt and do the following:

Diskpart
List disk
List volume

Select disk 0
Select volume 1
Clean

Message received:
DiskPart has encountered an error: The request could not be performed because of an I/O device error. See the System Event Log for more information.
----------------------------------------------------------------------------------
4- For this step I connect all my SDD#1 and HDD and put the SDD#1 on other port.
I go to CMD and enter the same command than above for same result.
This time I can check the Event Viewer:

Event Viewer
464 Error and 1 Warning

Warning
Event Properties - Event 153, disk
The IO operation at logical block address 0x0 for Disk 2 (PDO name: \Device\0000002a) was retried.

Errors (repeat the following errors 232 time ? - I don't check all but it appear to be same two errors)
Event Properties - Event 24620, BitLocker Driver
Encrypted volume check: Volume information on \\?\Volume{01128aa1-0000-0000-007e-000000000000} cannot be read.

Event Properties - Event 7, disk
The device, \Device\Harddisk2\DR2, has a bad block.
----------------------------------------------------------------------------------
5- I try the free program “ MiniTool Partition Wizard Free Edition 9.1” and nothing work. Not able to delete partion not able to create one.
----------------------------------------------------------------------------------
6- I try GParted under XUbuntu and it’s not work too.
----------------------------------------------------------------------------------

I am very sad. I do not have $ 200 for buying another SSD.
Are there something to do to format the SSD # 1?
I can’t believe it's broken. I have hard disks (trays) much older than it and that still works

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

SDD and a HDD windows 10

I have Windows 10 installed on a 525gb SDD. I have a 1tb HDD that I'm using for my data. I've been reading a lot of conflicting tweaks to use on the SDD. Help!

1. Should I eliminate the swap on the SDD? I do a have a windows managed swap file on the HDD.

2. Should I turn off indexing on the SDD?

3. Should I turn off system restore on the SDD?

Most of the articles I've been reading have been a couple of years old. I know that the current SDDs are better but do these same tweaks apply now?

Any info and suggestions are appreciated.

Thanks