Windows 10: Why am I getting continuous BSODs?

Good day all,A few months ago I updated all my drivers, but since then, I've been getting BSODs, which have been increasing in frequency. I'm running the windows 10 Operating System. It's been all sorts of issues like:Kmode exception not handledMemory management Win32k.sysWin32base.sysSomething about memory buffer, and also something about drivers Apologies for the vague descriptions. While these errors mostly pop up when I'm away from the computer, they still do while I'm actively using it. I've gone to device manager to check for faulty drivers but none have that yellow exclamation mark. M

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Getting continuous BSOD's on startup

Original Title: Windows 10 BSOD

I get continuous BSOD's on startup and on occasion the BSOD will happen after boot sometime. I have included a link to a zip file containing a minidump, memorydump and system info. Please help!