Windows 10: Why are you giving reinstall instructions when numerous people are having the exact same...

Numerous people are having the exact same issue so a reinstall will not work.

:)

 

Instructions to change board?

Boot off of the windows CD, repair your XP partition (hopefully you won't have to reinstall windows), install drivers, and you're good to go. You'll see dual channel mode in the BIOS splash screen results from POST. It'll be pretty obvious *Stick Out Tongue . Here's a list of general tweaks for the 939Dual-SATA2.
Step one- Set time, date
Step two- In CPU settings, disable cool n quiet, set memory clock to DDR400, play with memory timings (CAS-TRAS-TRP-TRCD), which are listed in the bios in the order CAS, TRCD, TRAS, and TRP. EDIT- new BIOS's mess around with this order, can't be too sure on it, but yeah at least you know what the RAM timings stand for *Big Grin .
Leave MA timing at 2T unless you think your system can handle 1T
Step three- in Chipset settings, enable onboard LAN, disable onboard Audio, disable AGP fast write, set primary graphics adapter, and set CPU-NB and NB-SB link speed to 1000mhz.
Step four- in IDE, disable controllers you aren't using. On all drives detected, enable SMART if you can and set PIO/DMA as high as they will go.
Step five- Enable legacy USB support
Step six- Set password if you're worried about anyone screwing around with your BIOS settings
Step seven- Configure your boot sequence. I reccomend hard drive first, optical drive second, and floppy drive third.
Step eight- Save changes, boot into XP, and enjoy your computer.

 

Reinstalling Windows 10 Edge

Have you followed through on the instructions completely to reinstall Edge? I don't use Edge, and haven't done this procedure, but this fix worked for two Edge users in the post I linked to. It's an older post and this fix may obsolete/not work with up to date versions of W10, but it's certainly worth a try.

Your reply gives no information about what you did, only what you didn't have, if an item is to be deleted and you can't find it I recommend moving on to the next step. Please list all steps you did, results of each step, and what didn't work in your reply to allow others to assist you.

On the other hand if you follow this process and it works then that's great, no need to do anything except report your success and mark the thread solved.

Good luck *Smile

 

Morphological Anti-aliasing on 5870

If you want people to try it you will need to give exact, detail and specific instruction on what to do.
This means a step by step guide. For example:
A. download 10.10a hotfix
B. extract it to it's default folder some where on the HD
C. take this file (download file) and replace, etc
You get the idea. Your instructions are simply vague for someone who's never modded drivers before.