Windows 10: Why aren't my installations going to the right disk drive?

Whenever I install something from chrome, it goes to my E: drive, but when I try to install the program from the installation wizard, and select the choice to download to E: it still attempts to download to the D: drive. What can I do to stop it from installing to the D: drive? There is not enough space on that drive

:)

 

HP Disk Drive not visible

Hi,

Thank you for posting your query on Microsoft community.

I would suggest you follow the steps below and see if it helps:

Method 1: I would suggest you first try the Troubleshooter.

Please follow the steps below:

• 
  Type “Troubleshooting” on the Windows Search bar and hit enter.
  
• 
  On the left side of the Troubleshooting window, click on “View all”
  
• 
  Click on Hardware and Devices. Please provide a password if asked for it and click ok.
  

Method 2:

• 
  Press Windows key + X key and click Device Manager.
  
• 
  Expand the Sound, Video and game controllers.
  
• 
  Right-click on the Disk Drives and click on Properties.
  
• 
  Go to the Drivers Tab and Click Enable (If not enabled).
  
• 
  Restart the computer and check.
  

Hope this helps. Please reply if you have further related queries.

Regards,

 

How to Partiton a Hard Drive in Vista

This is a way to get Vista to see another hard drive that is not associated with the OS. There is some times when your new hdd doesn't seem to want to work well with Vista. But, there is a solution in it.

Open the Computer Management By doing these steps.

• Click on the Start Button
• Click on Control Panel
• Click Administrative Tools
• Double click on Computer Management

You are now in the Navigation panel of the Computer Management.
When in Computer Management, you then have to allow the new drive to be recognized.

• Double click on Storage
• Double click on Disk Management

Now in the middle of your screen there is the layout of the Disk Drives that you have. The drives that are partitioned will show by the drive lettering. The others will just show up as having nothing at all in them. Below that there will be the Disk drives that are installed into the computer. You'll see that the primary one will all ways read as "Disk 0". Then you will have Disk 1 and so on. Under the Disks there will also see your CD-Rom drives.. If there is more then one, it will be labeled the same as Disk drives..

On to the Partitioning of the drive in question.

• Right Click on the drive
• Click to format the drive or Enable Volume. There will be a series of windows that open up. This is Vista's formatting. Just go threw the windows, and make sure everything is the way you want it to happen.
• Once the formatting is done, will take some time depending on the drive size.
• Right click on the drive
• Click on Mark the Partition as Active

After you have done those steps, The drive will be up and running threw Vista.



:Side Notes:
If you are not the Administer to the Os, then you will have to enable it..
You may also want to redo the drive lettering of it all. But, I really don't see a reason to do so. If you do, you have to redo drive paths and so forth.. A lot of work on something so small...

 

W7 Hard drive partition issue

to get rid of that 100 meg windows partition that setup creates for you on a new install on a blank hdd:

- press shift+f10 when on the partition management screen in setup <-- this opens a command prompt
- diskpart <-- start the windows command line partition management tool
- list disk <--- list the installed hdds in this computer for the next step
- select disk 0 <- might have to replace 0 with the number of the correct disk
- clean <-- this will erase all data on the disk you selected one step up- dont use the wrong disk!
- create partition primary <- creates a primary partition taking up all space on the drive, adjust the command if necessary
- exit, exit to exit diskpart and the command prompt
- click refresh in partition manager and select your newly created partition and install to that