Windows 10: Why cant i see the troubleshoot option on automatic repair

i brought a asus computer with a dvd player or something from somebody, i think the battery is corrupted cause the computer runs so slow and it needs a charger to work. i cant even try to update it to windows 8.1, couldnt connect to my wifi unless i have the ethernet cord in and i couldnt download anything so im just like ok dang, im going to try to do a automatic repair but when i went to it, i couldnt see the troubleshoot option, all i seen was the continue option and the turn off your pc option. PLEASE HELP ME

:)

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.

 

Automatic Repair Loop

Hi Charlene,

Your concern regarding the device going into an Automatic Repair Loop can be caused by change on its settings/configuration or broken system files. To effectively assist you with your concern, can confirm if you've made any changes on your device prior to
your concern?

As an initial step to get back into the normal Windows screen, we suggest that you perform a
Startup repair. The repair will attempt to fix any broken components/files which may prevent your device from booting properly. To do this, follow the steps below:

• On theAutomatic Repair screen, select Advanced options.
• Select Troubleshoot.
• Select Advanced options.
• Select Startup Repair.

We'll appreciate if you can send us an update.

 

Critical Service Failed - Automatic Repair and Advanced Options

Update:
Tried the Repair disk. Still back to "Your pc ran into a problem", "Preparing automatic repair" followed by Advanced Options which have been tried again.

Would anyone recommend:

• bootrec.exe /rebuildbcd
• bootrec.exe /fixmbr
• bootrec.exe /fixboot

Otherwise, I have a bootable Win PE file waiting to be burned on to USB key, as suggested by other Forum user, but unsure what to do with it when (or if) it boots up the laptop.