Windows 10: Why do I need to press reset before my pc boots

When I complete an update and restart my pc, I need to press the reset button before it will boot back into windows.

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Reset This PC doesn't give any errors but doesn't reset the PC

Hi,

To reset you device, follow the steps below:

• Shut down the tablet.
• Press and hold power button and volume up button until the boot menu is loaded.
• Select HDD recovery.
• Tap Yes.
• Select troubleshoot.
• Select Reset your PC.
• Follow the instruction on the screen to finish the procedure.

Let us know how it goes

 

Windows 10 won't boot after pressing reset button

Hi,

We apologize for delay in response and thanks for replying to us with the status of your issue.

As you said, you are unable to find automatic repair option while trying to perform method 1. I suggest you to try the below steps and check if you are able to find
Repair your Computer option.

Follow the below steps:

• 
  Create installation media for windows 10.
  
  Refer to the below link:
  
  http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install
  
• 
  Insert the Windows 10 installation DVD in the DVD ROM and restart your computer.
  
• 
  After you boot your computer using Windows DVD or System Repair Disc, a black screen appears with gray text "Press any key to boot from DVD". Press any key.
  
• 
  Select the correct time and Keyboard type.
  
• 
  Click Repair your computer in the lower left corner.
  
• 
  Follow the on screen instruction.
  

Hope it helps, reply to us with the status of your issue. We will be happy to assist you.