Windows 10: why does this keep hapening to my pc?, and i know it is my pc cause i can take a screen...

submitted by /u/Retromina
[link] [comments]

:)

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

PC Build Steps

1.1 - Ideally put optical in SATA 0, and SSD in SATA 1, this will cause the optical drive to be the default 1st boot option. You can change it manually if not, but I like it this way
2.infinity - yes, that's fine. if it's above 70 +/- 5 degrees, then it may just need a repaste/remount

 

Upgrade of Windows 10 causing blinking screen

Hi Paula,

I understand the inconvenience caused.

I would suggest you to boot to safe mode using an installation media and try the steps suggested above.

• On a working PC, go to the
  Microsoft software download website.
• 
  Download the media creation tool and then run it.
  
• 
  Select Create installation media for another PC.
  
• 
  Choose a language, edition, and architecture (64-bit or 32-bit).
  
• 
  Follow the steps to create installation media, and then select Finish.
  
• 
  Connect the installation media you created to your nonfunctional PC, and then turn it on.
  
• 
  On the initial setup screen, enter your language and other preferences, and then select
  Next. If you're not seeing the setup screen, your PC might not be set up to boot from a drive. Check your PC manufacturer's website for info on how to change your PC's boot order, and then try again.
  
• 
  Select Repair your computer.
  
• 
  On the Choose an option screen, select Troubleshoot. From there,
  Advanced options > Startup Settings > Restart.
  
  -After your PC restarts, you'll see a list of options. Select 4 or F4 to start your PC in
  Safe Mode. Or if you'll need to use the Internet, select 5 or F5 for
  Safe Mode with Networking.
  

Let us know the result.