Windows 10: Why doesn't my SSD not boot after installing a new MB?

This seems to be a common question but I have not seen.My older Dell desktop quit in that it would not boot but showed a blue screen that said, among other things, "required device is not connected or cannot be accessed," I decided to put together an all new computer which I had done a couple of times many years ago. It is recognized in the Asus bios of the new motherboard but will not boot. From what I have read simply changing the motherboard all the data will be accessible from your old SSD.My question is: should not the ssd be able to boot with the new motherboard and work just like it did

:)

 

Can´t boot after installing windows 10 in a new ssd.

Motherboard: ASRock H61M-S

SSD: Teamgroup GX2 128gb (brand new)

The problem started when i tried to install windows 10 in this ssd.

To clarify the ssd itself works fine, i can download stuff to it, open files, etc.

This is the order of what happend step by step:

.Firstly i download the installer from microsoft to the usb.

.Then i plugged it in and run the computer with the ssd and the usb only

.The installer opens up so i choose language and the other things.

.Now in the partitions section i clean everything (only ssd conected) and download there

.No errors pop up and the pc resets as it should but i am sent to the installer instead of the windows instalation section.

.I reset the pc and go to BIOS to check the order and i notice that the ssd doesn´t say UEFI on top so i change the order so the ssd starts first but i get a black screen with an underscore blinking so i wait and it goes directly to the windows installer.

.I turn off the pc unplug the usb and retry only to get greeted by the connect a boot device screen.

.I try redoing everything so i go back to the windows installer and create a new partition with the disk and install it there (removing the already created partitions)

.Exact same issue happend as before

.To check if theres something wrong with the USB i install Windows in a different disk (a hard drive) following the first steop of installation and worked fine.

Is there something wrong with the ssd? Is it not compatible? Did i do something wrong? Thanks in advance.

 

Windows doesn`t start. Authomatic repair doesn`t work.

Thanks again!!

I`m sorry I had not noticed that the text on the picture was in spanish. It says that windows has replaced some damaged clusters in "name" file and "directory". Then, at the end "an unspecified error occurred (75736e6a726e6c2e 4f6)".

I`ll do it and I`ll be updating this thread when I have the report.

- - - Updated - - -

I ran SeaTools. These are the results:




Does it mean my HDD is useless?

 

Windows doesn`t start. Authomatic repair doesn`t work.

Thanks for your answer, ken!

I deleted all my data. I had have it backed up.

I did a clean installation using the windows media creation tool (usb option).

No, I didn`t. I thought a clean installation would solve the problem.

After posting my previous message, I did it.





After chkdsk, I close cmd and tried to boot and the laptop just turned it off. This morning I`ve restarted it and automatically windows did a repair. Windows has booted and it seems that the repair tool has removed chrome and acrobat pdf reader (the only two programs I had installed after reinstalling windows).

Now Windows is installing updates and restarting my lapop, I`m kind of frightened. I don`t want it to happen again. Anyhow, I want to know what has brought the issue

I`ve been looking for information about the error code at the end of the picture and I didn`t get anywhere.