Windows 10: Why I always got BSOD with different error codes?

I always get bsod after I turn on my gpu drivers. My screen flickers and eventually will freeze but the keyboard of my laptop has still rgb, so probably it's working. Common bsod error codes are video management internal, dpc watchdog violation, and video tdr failure. After I disable the gpu drivers, the problem dissappears. I can't use my gpu and can't utilize the full potential of my unit. Many says show the minidump, here is mine, can you recommend actions. https://drive.google.com/drive/folders/1ebcKkMxL5IS_dQyaGIofdz6Fd1yu4cKm?usp=sharing

:)

 

BSOD with differents error code

hi, im just finished all these steps, but after the restart suddenly my pc is having another BSOD with error code KERNEL_MODE_HEAP_CORRUPTION. This is not the first time it happens, before this, im trying a several guide to fix my BSOD, whenever i finished
it, it seems like my pc having another BSOD with different error code. Here's the new minidump files :

https://drive.google.com/file/d/12XpiqTZne3i3foGhQ7C8gLHeF6IRwoqB/view?usp=sharing

Thanks for ur response

 

BSOD during gaming, plethora of different error codes!

Hello and welcome to TenForums

The log files that you provided only show one crash dump file so there is not a lot of information to go on. Furthermore the bugcheck code is not one I have ever seen before!

The stack recorded in the dump includes some references to storage and the analysis suggests memory corruption and so with nothing else to go on I would suggest that you do a check on the hard disk and RAM. This maybe the same as you have already run but it would be good to see the results.

Try CHKDSK
using option 3
Then



Diagnostics Test [/i] HDD TEST
*Arrow Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

Similarly with a memory test it would be good to post the results after you have run memtest86+ for a minimum of 8 passes

You indicated that many more crashes have occurred, however, they are not being recorded. Please make sure that your system is setup to record crash dump files: Configure Windows 10 to Create Minidump on BSOD

If the BSOD errors are all different it does tend to suggest a hardware problem. Sorry I can't be more helpful.

 

BSOD during gaming, plethora of different error codes!

Here you go, the HD tune scans, did memtest but after 1.5hrs only one pass had been finished so will leave it on tonight again for more passes.