Windows 10: Why is my Proline V146 not charging?

Good day, I have a Proline V146 and one day when I was charging it I noticed that, even though it was plugged in and charging, the battery percentage was actually going down. When I unplugged it the laptop immediately switched off. So I plugged it back in and turned it on. It still shows 'plugged in' but the battery percentage has gone all the way down to 1% and is not moving from that. If I unplug it, it immediately switches off. Please advise.Thank you.

:)

 

Installation

So proline v146 can't install games such as GTA, NFS most wanted

 

Toshiba Laptop Not Holding Battery Charge

attached is a pic of the internal of the laptop there does NOT appear to be a CMOS battery what should my next steps be? - fully charge existing battery and see if i remove it and install back teh next day whether its still fully charged? - charge the battery for 18 hours to charge the internal CMOS battery? - suggestions please as Im not sure

 

Battery Won't Charge Fully

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.