Windows 10: Why is my right Bluetooth earbud not playing sound but the left does

Why is my right Bluetooth earbud not playing sound but the left one does

:)

 

Bluetooth earbuds is connected but no sound

Hi Betty,

I'm Amr, an independent advisor.

Do your earbuds works on another device?

Did you try to repair your earbuds?

Here are some steps you can take to troubleshoot your Bluetooth earbuds issue:

1. Check your audio output settings

Go to Settings > System > Sound. Under "Choose your output device," make sure your Bluetooth earbuds are selected.

2. Update your Bluetooth drivers

Go to Device Manager > Bluetooth. Right-click on your Bluetooth adapter and select "Update driver."

3. Re-pair your Bluetooth earbuds

Remove your earbuds from the list of paired devices in your Bluetooth settings, then pair them again.

4. Check for interference

Other Bluetooth devices or electronics can sometimes interfere with Bluetooth connections.

Try turning off other devices or moving to a different location to see if that helps.

5. Reset your Bluetooth earbuds

Follow your earbuds' manual for instructions on how to reset them.

This usually involves holding down a button for a certain amount of time.

6. Try your earbuds on a different device

This can help you determine if the problem is with the earbuds themselves or with your laptop.

7. Contact the manufacturer

If none of the above steps works, there might be a problem with the earbuds themselves.

You might need to contact the manufacturer for further assistance.

I hope this is helpful. If you require any additional assistance, don't hesitate to respond to this.

This is a user-to-user support forum. We're users just like you helping other users to find solutions to their problems.

Best Regard

Amr

 

Tozo T12 Bluetooth earbuds not connecting correctly in Windows 11 Pro version 21H2

Please don't tell me to reset the earbuds I have done it a dozen times already.

Hardware: Processor 11th Gen Intel Core i7-11700T @ 1.4GHz, 32Mb RAM

Bluetooth Qualcomm QCA61x4A driver - running bluetooth HCI 9.0/LMP 9.602 bluetooth version 5

Symptom: Earbuds connect but then sound only plays for 1.5s on the left ear then nothing for 4 seconds then cycle repeats. If I put the right earbud back in the charger the left earbud plays normally.

Now if I do nothing but disconnect the bluetooth and fire up bluetooth on my IPhone 7Plus - i.e., bluetooth v4.2 the earbuds work fine.

The supplier replied "Good to know that your earbuds are working fine on the iPhone. I consulted our development department and thought that the problem may also be related to the compatibility of your computer. We updated the T12 firmware for the listed version of Windows 11 through communication with Microsoft, but not sure if your version of Windows 11 pro will work. You can check with Microsoft's customer service to see if there are any settings that need to be changed for normal use. Your case is very special as we have never had such feedback after updating the Windows 11 firmware"

Any suggestions out there on what the "settings" are that could be causing this issue - it's almost like bluetooth is polling two channels but not sending on one.

 

Bluetooth Earbuds

My earbuds connect via Bluetooth to my laptop. It shows they are connected but when I play music, the sound continues to come out of my laptop speakers. I went to the sound section and selected my earbuds but that didn't help...the music continues to come
out of my laptop speakers. Why doesn't the sound work on my earbuds?