Windows 10: Why newly Installed SATA Drive is located outside of "This PC" menu?

I have 3 drives:

C: NVMe M.2

D: NVMe M.2

E: SATA drive

The question is Windows lists my E: drive in both locations. Is this normal? Seems like not a big deal but I don't want that E: drive located outside of "This PC" group, can this be changed?



https://preview.redd.it/oq7wbi128ux...bp&s=c9e57ca18f844c3001870efb9b40b7f49707762f

submitted by /u/true-dci-john-luther
[link] [comments]

:)

 

PC Build Steps

1.1 - Ideally put optical in SATA 0, and SSD in SATA 1, this will cause the optical drive to be the default 1st boot option. You can change it manually if not, but I like it this way
2.infinity - yes, that's fine. if it's above 70 +/- 5 degrees, then it may just need a repaste/remount

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

SATA DVD-RW Drives

Hey Guys,

So, I finally just bought my new rig: EVGA A1 Mobo (w/ 6 SATA Slots), 2 WD Raptors (SATA - Gonna RAID 0 Boot), 4 Seagate 320GB Barracuda's (SATA - Gonna RAID 5 Storage).
However, I realized I also bought 2 DVD-RW drives, in SATA *Eek! not enough SATA ports on the mobo...

So a couple of questions follow:
1) Is SATA really faster for DVD-RW drives than IDE?
2) Is there anyway to Inline/Series the (2) SATA DVD-RW drives, kinda like you do with IDE (Master/Slave)?
3) Are there any SATA-->IDE reverse adaptors (not the opposite, I know those exist)?
4) Based on the above answers, should I:

• a) Get a PCI-E SATA RAID Card to Handle One of the RAID Arrays, and keep the DVD-RW drives as SATA? (although those are dang expensive, AND I don't know where that PCI Card is gonna fit - got an 8800gtx, PCI Slot-Cooler, Wifi card... an extra slot but no room down there)
• b) Return the DVD-RW SATA drives and get (2) IDE DVD-RW drives?
• Another option that won't require me spending a lot of money?

Eesh, I'm kinda stuck on my build if I don't have a CD Drive to read from for Windows Install(I don't have any extra ones sittin around - and I want to install my RAID 5 Storage array right away)

Suggestions?*Confused