Windows 10: Why wont my new mobo recognize my ssd as a windows boot drive?

I upgraded my pc with a new mobo but it wont let me boot windows 10 from my new ssd, old hdd or just the usb using the windows media creation tool. I tried a bunch of bios setting and still wont let me boot into windows 10. What can i do to fix?? Specs are provided in image

:)

 

SATA drive not being recognized on Gigabyte Mobo

After I updated the BIOS to the latest version 8 I was able to have the SATA recognized.
After running sfc /scannow for maintenance I can't get the SATA drive to boot first. It is recognized in the BIOS and is listed first in the boot order under Advanced BIOS Features.

When the IDE drive boots it is not recognized in either Windows Explorer or disk management.

Any thoughts on why I can't see the SATA drive anymore would be appreciated.

 

New SSD wont boot

Hi John

Boot into BIOS, is SATA Mode set to AHCI to enable booting from an SSD drive?

Is the SSD drive set a top of the Boot Priority list?

Did you try connecting that SSD to the SATA Port normally used by your old HDD?

 

New windows 10 installtion on New SSD - wont boot unless old SSD present

It seems you installed Windows while the both SSDs were connected. This would have caused your current problem. Maybe it is sufficient to do this:

1. Launch the Disk Manager.
2. Right-click drive C:, then mark it as "active".
3. Shut down Windows
4. Open the BIOS and tell it that the new SSD is the primary boot device.
5. Disconnect the old SSD.
6. Boot up normally.

If this does not work then you might have to do this:

1. Disconnect the old SSD.
2. Re-install Windows on the new SSD, using the Media Creation Tool.