Windows 10: WiFi and Ethernet Combined On System

My PC, like most others, has the ability to connect to the net via the wireless or ethernet route. Thinking I knew enough about network connections already, I was proved wrong. It all happened during a speed test of my wireless network. I always noticed that whenever I connected to my wireless network, my ethernet connection always stayed active, it doesn't disconnect. Running speed tests with Wi-Fi active always resulted in the same transfer rates as when I tested with ethernet. Grant that's possible, but not likely. On further investigation and with Task Manager active viewing the comms on t

:)

 

WIFI Works, Ethernet won't

OK but why?

NOT YELLING, JUST EMPHASIZING

Please note, I installed the new Lynksis, it worked just fine for 3-4 days on both my MACBOOK PRO when in ethernet connect and the Dell, then the ethernet just quit working for both my MacBook Pro and Dell desktop. It did work, then just quit for no apparent reason. WIFi for iPhone, iPad, Andriod Phone, and when I set to wifi for my MacBook pro all work fine.

Detailed history: I first noticed that on my Desktop dell that is CAT5 ethernet connected to the WIFI ROuter, that it stopped, no internet access. I began to trouble shoot, and turned off my WIFI on my MAcbook and it wouldnt work either, plugged into same router but different cat5 cable. At that time, all WIFI devices still worked. I figured that it must be the ethernet side of the WIFI router, so I replaced the router with brand new one. the Lynksys N900 listed in original thread. Ethernet and everything worked just fine for 3-4 days. But then ethernet quit, but wifi still works.

Whatever the problem, it affects both my MacBook Pro and Dell with WIN 7. I'm guessing it is NOT a computer problem, if it is it is affecting both my Mac and Dell, separate cat 5 cables to same wifi router

To remixedcat, I don't know for sure how to check IP settings, see above post, no damage apparent to anything.

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

laptop can't find wifi but connects with ethernet cable

Please try these troubleshooting steps that may help.

1. Make sure the router SSID broadcast is on.
   
2. Change the wifi channel to see if it resolves the problem.
   
3. Enter the SSID and WPA2 password manually and see if the laptop connects.
   
4. Temporarily turn off the encryption.
   
5. We go into device manager & check updates for wifi drivers, we may need to simply update the driver.
   
6. We go to Settings - Network & Internet - Status - Change Adapter Options, then right-clicked 'Ethernet' and disabled it. We do the same with wifi. Then we (with Ethernet still disabled) enabled wifi. It should re-connect to your wifi after a while.
   
7. We have to disconnect our Ethernet cable from our laptop and follow the steps:
   Start>Control Panel>Network and Sharing Center>Manage Wireless Networks and remove all wireless connections by right click on it and select Remove network from the drop down menu. After doing this, close the windows and scan for the wifi networks.
   Click on the available network and select connect. After a while, we will be asked to give a password for our wifi connection. Type the password and click on connect button. And now will be connected to our wifi network via wireless.
   
8. First is to disconnect the internet cable from the laptop then uninstall/reinstall the wifi adapter.
   Go to Device Manager and uninstall the wifi adapter.
   Once uninstalled, reboot the laptop and it should reinstall the driver automatically.
   After the reboot do try connecting to your wireless network again.
   If all these will not work, do also make sure that the wireless adapter is enabled. Depending the model of your laptop there should be key combinations on how to enable/disable it.